1#@!#!123s

: / proc / self / root / proc / thread-self / root / home / vblioqus / karachi777.vip / in / 106014 / 900508 /
Filename : zsh.zip
back
PK�����t�g\��qluJ��uJ����site-functions/_firewalldnu��[�����������#compdef firewall-cmd firewall-offline-cmd

local curcontext="$curcontext" name nm="$compstate[nmatches]"
local -a state line expl direct args auxargs opargs suf
typeset -A opt_args

direct=(
  '--get-all-chains[get all chains]'
  '--get-chains[get all chains added to the table]:family:(ipv4 ipv6 eb):table:->tables'
  '--add-chain[add a new chain to the table]:family:(ipv4 ipv6 eb):table:->tables:new chain'
  '--remove-chain[remove a chain from the table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains'
  '--query-chain[return whether the chain has been added to the table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains'
  '--get-all-rules[get all rules]'
  '--get-rules[get all rules added to chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains'
  '--add-rule[add rule to chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains:priority: :*:argument'
  '--remove-rule[remove rule with priority from chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains:priority: :*:argument'
  '--remove-rules[remove rules from chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain->chains'
  '--query-rule[chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain: :priority: :*:argument'
  '--get-all-passthroughs[get all tracked passthrough rules]'
  '--get-passthroughs[get tracked passthrough rules]:family:(ipv4 ipv6 eb):*:: : _iptables'
  '--add-passthrough[add a new tracked passthrough rule]:family:(ipv4 ipv6 eb):*:: : _iptables'
  '--remove-passthrough[remove a tracked passthrough rule]:family:(ipv4 ipv6 eb):*:: : _iptables'
  '--query-passthrough[return whether the tracked passthrough rule has been added]:family:(ipv4 ipv6 eb):*:: : _iptables'
)
name='--name=[specify new name]:name'

case $service in
  firewall-cmd)
    direct+=(
      '--passthrough[pass a command through (untracked by firewalld)]:family:(ipv4 ipv6 eb):*:: : _iptables'
    )
    args=(
      '(--timeout)--permanent[set an option permanently]'
    )
    auxargs=(
      '(--permanent)--timeout=[specify time for rule to be active]:time value (seconds)'
    )
    opargs=(
      '(aux --permanent --zone)--state[print firewalld state]'
      '(aux --permanent --zone)--reload[reload firewall and keep state information]'
      '(aux --permanent --zone)--complete-reload[reload firewall and lose state information]'
      '(aux --permanent --zone)--runtime-to-permanent[create permanent from runtime configuration]'
      '(aux --permanent --zone -q --quiet)--get-active-zones[print currently active zones]'
      '*--remove-service=[remove a service from a zone]:service:->services'
      '(aux --permanent --zone)--panic-on[enable panic mode]'
      '(aux --permanent --zone)--panic-off[disable panic mode]'
      '(aux --permanent --zone)--query-panic[query whether panic mode is enabled]'
    )
  ;;
  firewall-offline-cmd)
    args=(
      '--system-config[specify path to firewalld system configuration]:path:_directories'
      '--default-config[specify path to firewalld default configuration]:path:_directories'
      '--migrate-system-config-firewall=[import configuration data from the given configuration file]:file:_files'
      '--disabled[disable the firewall by disabling the firewalld service]' '!(--disabled)--enabled'
      '!--'{add,remove}'module=:iptables module' '!--custom-rules=:type:table:filename (ignored'
      \*{-s+,--service=}'[enable a service in the default zone]:service:->services'
      '*--remove-service=[disable a service in the default zone]:service:->services'
      \*{-p+,--port=}'[enable a port in the default zone]:port:->ports'
      \*{-t+,--trust=}'[bind an interface to the trusted zone]:interface:_net_interfaces'
      {-m+,--masq=}'[enable masquerading in the default zone, IPv4 only]:interface (ignored)'
      '--forward-port=[add port forward in the default zone]:port forward:->port-forwards'
      '--block-icmp=[block this ICMP type in the default zone]:icmp type:->icmp-types'
      "--policy-server[change Polkit actions to 'server'  (more restricted)]"
      "--policy-desktop[change Polkit actions to 'desktop' (less restricted)]"
    )
    opargs=(
      '*--remove-service-from-zone[remove a service from a zone]:service:->services'
    )
  ;;
esac

# option ordering doesn't matter but listing fewer options makes
# completion more useful:
(( $words[(I)--direct] )) || direct=( \!$^direct )   # only list direct options after --direct
(( $words[(I)--new-*-from-file*] )) || name="!$name" # also check for required options before listing --name

_arguments -C -s $args $direct \
  '!(-q --quiet)'{-v,--verbose} \
  '(-q --quiet --list-all --list-all-zones --list-lockdown-whitelist-commands --list-lockdown-whitelist-contexts --list-lockdown-whitelist-uids --list-lockdown-whitelist-users --list-services --list-ports --list-protocols --list-icmp-blocks --list-forward-ports --list-rich-rules --list-interfaces --list-sources --get-default-zone --get-active-zones --get-zone-of-interface --get-zone-of-source --get-zones --get-services --get-icmptypes --get-target --info-zone --info-icmptype --info-service --info-ipset --get-ipsets --get-entries --info-helper --get-helpers --get-destinations --get-description --version -h --help)'{-q,--quiet}"[don't print status messages]" \
  '*--zone=[use this zone to set or query options, else default zone]:zone:->zones' \
  + aux \
  $auxargs $name \
  '*--option=[specify option]:option (key=value)' \
  '--type=[specify ipset type]:ipset type:->ipset-types' \
  '--ipset=[specify ipset]:ipset:->ipsets' \
  '--icmptype=[specify icmp type]:icmp type:->icmp-types' \
  '--service=[specify service]:service:->services' \
  '--helper=[specify helper]:helper:->helpers' \
  '--family=[specify family]:family:(ipv4 ipv6)' \
  '--module=[specify module]:module' \
  + '(op)' \
  $opargs \
  '(aux -)'{-h,--help}'[display usage information]' \
  '(aux -)'{-V,--version}'[display version information]' \
  '(aux --permanent --zone)--get-log-denied[print the log denied value]' \
  '(aux --permanent --zone)--set-log-denied=[set log denied value]:value:(all unicast broadcast multicast off)' \
  '(aux --permanent --zone)--get-automatic-helpers[print the automatic helpers value]' \
  '(aux --permanent --zone)--set-automatic-helpers=[set automatic helpers value]:value:(yes no system)' \
  '(aux --permanent --zone -q --quiet)--get-default-zone[print default zone for connections and interfaces]' \
  '(aux --permanent --zone)--set-default-zone=[set default zone]:zone:->zones' \
  '(--zone -q --quiet)--get-zones[print predefined zones]' \
  '(--zone -q --quiet)--get-services[print predefined services]' \
  '(--zone -q --quiet)--get-icmptypes[print predefined icmptypes]' \
  '(-q --quiet)*--get-zone-of-interface=[print name of the zone the interface is bound to]:interface:_net_interfaces' \
  '(-q --quiet)*--get-zone-of-source=[print name of the zone a source is bound to]:source' \
  '(-q --quiet)--list-all-zones[list everything added for or enabled in all zones]' \
  '--new-zone=[add a new zone]:zone:->zones' \
  '--new-zone-from-file=[add a new zone from file with optional name]:filename:_files' \
  '--delete-zone=[delete an existing zone]:zone:->zones' \
  '--load-zone-defaults=[load zone default settings]:zone:->zones' \
  '(-q --quiet)--get-target[get the zone target]' \
  '--set-target=[set the zone target]:target:(default ACCEPT DROP REJECT)' \
  '(-q --quiet)--info-zone=[print information about a zone]:zone:->zones' \
  '--path-zone=[print file path of a zone]:zone:->zones' \
  '(aux --permanent --zone)--get-ipset-types[print the supported ipset types]' \
  '--new-ipset=[add a new ipset]:ipset:->ipsets' \
  '--new-ipset-from-file=[add a new ipset from file with optional name]:filename:_files' \
  '--delete-ipset=[delete an existing ipset]:ipset:->ipsets' \
  '--load-ipset-defaults=[load ipset default settings]:ipset:->ipsets' \
  '(-q --quiet)--info-ipset=[print information about an ipset]:ipset' \
  '--path-ipset=[print file path of an ipset]:ipset' \
  '(aux --permanent --zone -q --quiet)--get-ipsets[print predefined ipsets]' \
  '--set-description=[set new description]:description' \
  '(-q --quiet)--get-description[print description]' \
  '--set-short=[set new short description]:description' \
  '--get-short[print short description]' \
  '*--add-entry=[add a new entry to an ipset]:entry' \
  '*--remove-entry=[remove an entry from an ipset]:entry' \
  '*--query-entry=[return whether ipset has an entry]:entry' \
  '(-q --quiet)--get-entries[list entries of an ipset]' \
  '*--add-entries-from-file=[add a new entries to an ipset]:entry' \
  '--remove-entries-from-file=[remove entries from an ipset]:entry' \
  '--new-icmptype=[add a new icmptype]:icmp type:->icmp-types' \
  '--new-icmptype-from-file=[add a new icmptype from file with optional name]:file:_files' \
  '--delete-icmptype=[delete an existing icmptype]:icmp type:->icmp-types' \
  '--load-icmptype-defaults=[load icmptype default settings]:icmp type:->icmp-types' \
  '(-q --quiet)--info-icmptype=[print information about an icmptype]:icmp type:->icmp-types' \
  '--path-icmptype=[print file path of an icmptype]:icmp type:->icmp-types' \
  '*--add-destination=[enable destination for ipv in icmptype]:destination:->destinations' \
  '*--remove-destination=[disable destination for ipv in service or icmp-type]:destination:->destinations' \
  '(-q --quiet)--get-destinations[list destinations]' \
  '--new-service=[add a new service]:service' \
  '--new-service-from-file=[add a new service from file with optional name]:file:_files' \
  '--delete-service=[delete an existing service]:service:->services' \
  '--load-service-defaults=[load icmptype default settings]:service:->services' \
  '(-q --quiet)--info-service=[print information about a service]:service:->services' \
  '--path-service=[print file path of a service]:service:->services' \
  '*--add-port=[add a new port to service, zone or helper]:port:->ports' \
  '*--remove-port=[remove a port from a service, zone or helper]:port:->ports' \
  '*--query-port=[return whether the port has been added for service, zone or helper]:port:->ports' \
  '--get-ports[list ports of service or helper]' \
  '*--add-protocol=[add a new protocol to service or zone]:protocol' \
  '*--remove-protocol=[remove a protocol from service or zone]:protocol' \
  '*--query-protocol=[return whether the protocol has been added for service or zone]:protocol' \
  '--get-protocols[list protocols of service]' \
  '*--add-source-port=[add a new source port to service or zone]:port:->ports' \
  '*--remove-source-port=[remove a source port from service or zone]:port:->ports' \
  '*--query-source-port=[return whether the source port has been added for service or zone]:port:->ports' \
  '--get-source-ports[list source ports of service]' \
  '*--add-module=[add a new module to service]:module' \
  '*--remove-module=[remove a module from service]:module' \
  '*--query-module=[return whether the module has been added for service]:module' \
  '--get-modules[list modules of service]' \
  '*--set-destination=[set destination for ipv to address in service]:destination:->destinations' \
  '--query-destination=[return whether destination ipv is set for service or enabled for icmptype]:destination:->destinations' \
  '(-q --quiet)--list-all[list everything added for or enabled in a zone]' \
  '(-q --quiet)--list-services[list services added for a zone]' \
  '*--add-service=[add a service for a zone]:service:->services' \
  '*--query-service=[return whether service has been added for a zone]:service:->services' \
  '(-q --quiet)--list-ports[list ports added for a zone]' \
  '(-q --quiet)--list-protocols[list protocols added for a zone]' \
  '--list-source-ports[list source ports added for a zone]' \
  '(-q --quiet)--list-icmp-blocks[list Internet ICMP type blocks added for a zone]' \
  '*--add-icmp-block=[add an ICMP block for a zone]:icmp type:->icmp-types' \
  '*--remove-icmp-block=[remove the ICMP block from a zone]:icmp type:->icmp-types' \
  '*--query-icmp-block=[return whether an ICMP block has been added for a zone]:icmp type:->icmp-types' \
  '--add-icmp-block-inversion[enable inversion of icmp blocks for a zone]' \
  '--remove-icmp-block-inversion[disable inversion of icmp blocks for a zone]' \
  '--query-icmp-block-inversion[return whether inversion of icmp blocks has been enabled for a zone]' \
  '(-q --quiet)--list-forward-ports[list IPv4 forward ports added for a zone]' \
  '*--add-forward-port=[add the IPv4 forward port for a zone]: :->port-forwards' \
  '*--remove-forward-port=[remove the IPv4 forward port from a zone]: :->port-forwards' \
  '*--query-forward-port=[return whether the IPv4 forward port has been added for a zone]: :->port-forwards' \
  '--add-forward[enable forwarding between interfaces and sources in a zone]' \
  '--remove-forward[disable forwarding between interfaces and sources in a zone]' \
  '--query-forward[return whether forwarding has been enabled for a zone]' \
  '--add-masquerade[enable IPv4 masquerade for a zone]' \
  '--remove-masquerade[disable IPv4 masquerade for a zone]' \
  '--query-masquerade[return whether IPv4 masquerading has been enabled for a zone]' \
  '(-q --quiet)--list-rich-rules[list rich language rules added for a zone]' \
  '*--add-rich-rule=[add rich language rule for a zone]:rule' \
  '*--remove-rich-rule=[remove specified rich language rule from a zone]:rule' \
  '*--query-rich-rule=[return whether specified rich language rule has been added for a zone]:rule' \
  '(-q --quiet)--list-interfaces[list interfaces that are bound to a zone]' \
  '*--add-interface=[bind the specified interface to a zone]:interface:_net_interfaces' \
  '*--change-interface=[change zone the specified interface is bound to]:interface:_net_interfaces' \
  '*--query-interface=[query whether specified interface is bound to a zone]:interface:_net_interfaces' \
  '*--remove-interface=[remove binding of specified interface from a zone]:interface:_net_interfaces' \
  '(-q --quiet)--list-sources[list sources that are bound to a zone]' \
  '*--add-source=[bind source to a zone]: :->sources' \
  '*--change-source=[change zone a source is bound to]: :->sources' \
  '*--query-source=[query whether source is bound to a zone]: :->sources' \
  '*--remove-source=[remove binding of a source from a zone]: :->sources' \
  '--new-helper=[add a new helper]:helper:->helpers' \
  '--new-helper-from-file=[add a new helper from file with optional name]:file:_files' \
  '--delete-helper=[delete an existing helper]:helper:->helpers' \
  '--load-helper-defaults=[load helper default settings]:helper:->helpers' \
  '(--zone -q --quiet)--info-helper=[print information about an helper]:helper:->helpers' \
  '--path-helper=[print file path of an helper]:helper:->helpers' \
  '(--zone -q --quiet)--get-helpers[print predefined helpers]' \
  '--set-module=[set module to helper]:module' \
  '--get-module[get module from helper]' \
  '--set-family=[set family for helper]:family' \
  '--get-family[get family from helper]' \
  '(aux --permanent --zone)--lockdown-on[enable lockdown]' \
  '(aux --permanent --zone)--lockdown-off[disable lockdown]' \
  '(aux --permanent --zone)--query-lockdown[query whether lockdown is enabled]' \
  '(-q --quiet)--list-lockdown-whitelist-commands[list all command lines that are on the whitelist]' \
  '*--add-lockdown-whitelist-command=[add a command to the whitelist]:command:_cmdstring' \
  '*--remove-lockdown-whitelist-command=[remove the command from the whitelist]:command' \
  '*--query-lockdown-whitelist-command=[query whether a command is on the whitelist]:command' \
  '(-q --quiet)--list-lockdown-whitelist-contexts[list all contexts that are on the whitelist]' \
  '*--add-lockdown-whitelist-context=[add the specified context to the whitelist]:context' \
  '*--remove-lockdown-whitelist-context=[remove a context from the whitelist]:context' \
  '*--query-lockdown-whitelist-context=[query whether a context is on the whitelist]:context' \
  '(-q --quiet)--list-lockdown-whitelist-uids[list all user ids that are on the whitelist]' \
  '*--add-lockdown-whitelist-uid=[add the specified user id to the whitelist]:uid' \
  '*--remove-lockdown-whitelist-uid=[remove the specified user id from the whitelist]:uid' \
  '*--query-lockdown-whitelist-uid=[query whether a user id is on the whitelist]:uid' \
  '(-q --quiet)--list-lockdown-whitelist-users[list all user names that are on the whitelist]' \
  '*--add-lockdown-whitelist-user=[add the specified user to the whitelist]:user:_users' \
  '*--remove-lockdown-whitelist-user=[remove the specified user from the whitelist]:user:_users' \
  '*--query-lockdown-whitelist-user=[query whether the specified user is on the whitelist]:user:_users' \
  '--direct[first option for all direct options]'

[[ $state = sources ]] && compset -P 'ipset:' && state=ipsets
case $state in
  sources)
    _message -e sources "source[/mask]|MAC|ipset:ipset"
  ;;
  chains)
    _description chains expl 'chain'
    compadd "$expl[@]" - ${${(f)"$(_call_program chains $words[1] ${(k)opt_args[--permanent]} --direct --get-all-chains)"}##* }
  ;;
  destinations)
    if compset -P 1 '*:'; then
      if compset -P 1 '*/'; then
        _message -e masks "mask"
      else
        _message -e addresses "address"
      fi
    else
      compset -S ':*' || suf=( -qS : )
      _description ipvs expl 'ipv'
      compadd "$expl[@]" $suf - ipv4 ipv6
    fi
  ;;
  helpers)
    _description helpers expl 'helper'
    compadd "$expl[@]" - $(_call_program helpers $words[1] ${(k)opt_args[--permanent]} --get-helpers)
  ;;
  icmp-types)
    _description icmp-types expl 'icmp type'
    compadd "$expl[@]" - $(_call_program icmp-types $words[1] --get-icmptypes)
  ;;
  ipsets)
    _description ipsets expl 'ipset'
    compadd "$expl[@]" - $(_call_program ipsets $words[1] ${(k)opt_args[--permanent]} --get-ipsets)
  ;;
  ipset-types)
    _description ipset-types expl 'ipset type'
    compadd "$expl[@]" - $(_call_program ipset-types $words[1] --get-ipset-types)
  ;;
  ports)
    if compset -P 1 '*/'; then
      _description protocols expl 'protocol'
      compadd "$expl[@]" - tcp udp sctp dccp
    else
      _message -e ports 'port number'
    fi
  ;;
  port-forwards)
    _values -S = -s : 'port forward' \
      'port[specify port]:port range:_sequence -n 2 -s - _ports' \
      'proto[specify protocol]:protocol:(tcp udp sctp dccp)' \
      'toport[specify port]:port range:_sequence -n 2 -s - _ports' \
      'toaddr[specify destination address]:address[/mask]'
  ;;
  services)
    _description services expl 'service'
    compadd "$expl[@]" - $(_call_program services $words[1] --get-services)
  ;;
  tables)
    _description services expl 'service'
    compadd "$expl[@]" - security raw mangle nat filter
  ;;
  zones)
    _description zones expl 'zone'
    compadd "$expl[@]" - $(_call_program zones $words[1] --get-zones)
  ;;
esac

# return whether matches were added
[[ nm -ne compstate[nmatches] ]] && return 0
return 1
PK�����u�g\ا�	��	����site-functions/_systemd-resolvenu��[�����������#compdef systemd-resolve
# SPDX-License-Identifier: LGPL-2.1+

#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# systemd is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with systemd; If not, see <http://www.gnu.org/licenses/>.

_dns_protocol() {
    local -a _protocol
    _protocol=( $(_call_program protocol ${service} --legend=no --protocol help; echo help) )
    _values 'protocol' "$_protocol[@]"
}

_dns_type() {
    local -a _type
    _type=( $(_call_program type ${service} --legend=no --type help; echo help) )
    _values 'type' "$_type[@]"
}

_dns_class() {
    local -a _class
    _class=( $(_call_program class ${service} --legend=no --class help; echo help) )
    _values 'class' "$_class[@]"
}

_systemd-resolve_none() {
    _alternative : \
        'domain:DNS address:' \
        'address:email address:'
}

_arguments \
    {-h,--help}'[Print a short help text and exit]' \
    '--version[Print a short version string and exit]' \
    '--legend=no[Do not show headers and footers]' \
    '-4[Resolve IPv4 addresses]' \
    '-6[Resolve IPv6 addresses]' \
    {-i+,--interface=}'[Look on interface]:interface:_net_interfaces' \
    {-p+,--protocol=}'[Look via protocol]:protocol:_dns_protocol' \
    {-t+,--type=}'[Query RR with DNS type]:type:_dns_type' \
    {-c+,--class=}'[Query RR with DNS class]:class:_dns_class' \
    '--service[Resolve services]' \
    '--service-address=no[Do not resolve address for services]' \
    '--service-txt=no[Do not resolve TXT records for services]' \
    '--openpgp[Query OpenPGP public key]' \
    '--tlsa[Query TLS public key]' \
    '--cname=no[Do not follow CNAME redirects]' \
    '--search=no[Do not use search domains]' \
    '--statistics[Show resolver statistics]' \
    '--reset-statistics[Reset resolver statistics]' \
    '*::default: _systemd-resolve_none'
PK�����u�g\��m��������site-functions/_hostnamectlnu��[�����������#compdef hostnamectl
# SPDX-License-Identifier: LGPL-2.1+

_hostnamectl_set-hostname() {
    if (( CURRENT <= 3 )); then
        _message "new hostname"
    else
        _message "no more options"
    fi
}

_hostnamectl_set-icon-name() {
    if (( CURRENT <= 3 )); then
        _message "new icon name"
    else
        _message "no more options"
    fi
}

_hostnamectl_set-chassis() {
    if (( CURRENT <= 3 )); then
        _chassis=( desktop laptop convertible server tablet handset watch embedded vm container )
        _describe chassis _chassis
    else
        _message "no more options"
    fi
}

_hostnamectl_set-deployment() {
    if (( CURRENT <= 3 )); then
        _message "new environment"
    else
        _message "no more options"
    fi
}

_hostnamectl_set-location() {
    if (( CURRENT <= 3 )); then
        _message "new location"
    else
        _message "no more options"
    fi
}

_hostnamectl_command() {
    local -a _hostnamectl_cmds
    _hostnamectl_cmds=(
        "status:Show current hostname settings"
        "set-hostname:Set system hostname"
        "set-icon-name:Set icon name for host"
        "set-chassis:Set chassis type for host"
        "set-deployment:Set deployment environment for host"
        "set-location:Set location for host"
    )
    if (( CURRENT == 1 )); then
        _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
    else
        local curcontext="$curcontext"
        cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
        if (( $#cmd )); then
            if [[ $cmd == status ]]; then
                _message "no options"
            else
                _hostnamectl_$cmd
            fi
        else
            _message "unknown hostnamectl command: $words[1]"
        fi
    fi
}

_arguments -s \
    {-h,--help}'[Show this help]' \
    '--version[Show package version]' \
    '--transient[Only set transient hostname]' \
    '--static[Only set static hostname]' \
    '--pretty[Only set pretty hostname]' \
    '--no-ask-password[Do not prompt for password]' \
    {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
    {-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
    '*::hostnamectl commands:_hostnamectl_command'
PK�����u�g\D+~���������site-functions/_busctlnu��[�����������#compdef busctl
# SPDX-License-Identifier: LGPL-2.1+

# busctl(1) completion                               -*- shell-script -*-
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# systemd is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with systemd; If not, see <http://www.gnu.org/licenses/>.

(( $+functions[_busctl_command] )) || _busctl_command()
{
    local -a _busctl_cmds
    _busctl_cmds=(
        "list:List bus names"
        "status:Show bus service, process or bus owner credentials"
        "monitor:Show bus traffic"
        "capture:Capture bus traffix as pcap"
        "tree:Show object tree of service"
        "introspect:Introspect object"
        "call:Call a method"
        "get-property:Get property value"
        "set-property:Set property value"
    )
    if (( CURRENT == 1 )); then
        _describe -t commands 'busctl command' _busctl_cmds || compadd "$@"
    else
        local curcontext="$curcontext"
        cmd="${${_busctl_cmds[(r)$words[1]:*]%%:*}}"
        if (( $+functions[_busctl_$cmd] )); then
            _busctl_$cmd
        else
            _message "no more options"
        fi
    fi
}

_arguments \
    {-h,--help}'[Prints a short help text and exits.]' \
    '--version[Prints a short version string and exits.]' \
    '--no-pager[Do not pipe output into a pager]' \
    '--no-legend[Do not show the headers and footers]' \
    '--system[Connect to system manager]' \
    '--user[Connect to user service manager]' \
    {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
    {-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
    '--address=[Connect to the bus specified by address]:address' \
    '--show-machine[Show machine ID column in list]' \
    '--unique[Only show unique names]' \
    '--acquired[Only show acquired names]' \
    '--activatable[Only show activatable names]' \
    '--match=[Only show matching messages]:match' \
    '--list[Do not show tree, but simple object path list]' \
    '--quiet[Do not show method call reply]'\
    '--verbose[Show result values in long format]' \
    '--expect-reply=[Expect a method call reply]:boolean:(1 0)' \
    '--auto-start=[Auto-start destination service]:boolean:(1 0)' \
    '--allow-interactive-authorization=[Allow interactive authorization for operation]:boolean:(1 0)' \
    '--timeout=[Maximum time to wait for method call completion]:timeout (seconds)' \
    '--augment-creds=[Extend credential data with data read from /proc/$PID]:boolean:(1 0)' \
    '*::busctl command:_busctl_command'
PK�����u�g\Y��x���x�����site-functions/_parallelnu��[�����������#compdef parallel
(( $+functions[_comp_parallel] )) ||
  eval "$(parallel --shell-completion auto)" &&
  _comp_parallel
PK�����v�g\�&J�<���<����site-functions/_systemctlnu��[�����������#compdef systemctl
# SPDX-License-Identifier: LGPL-2.1+

(( $+functions[_systemctl_command] )) || _systemctl_command()
{
  local -a _systemctl_cmds
  _systemctl_cmds=(
    "list-sockets:List sockets"
    "list-timers:List timers"
    "list-units:List units"
    "start:Start (activate) one or more units"
    "stop:Stop (deactivate) one or more units"
    "reload:Reload one or more units"
    "restart:Start or restart one or more units"
    "condrestart:Restart one or more units if active"
    "try-restart:Restart one or more units if active"
    "reload-or-restart:Reload one or more units if possible, otherwise start or restart"
    "force-reload:Reload one or more units if possible, otherwise restart if active"
    "hibernate:Hibernate the system"
    "hybrid-sleep:Hibernate and suspend the system"
    "suspend-then-hibernate:Suspend the system for a period of time, and then hibernate it"
    "try-reload-or-restart:Reload one or more units if possible, otherwise restart if active"
    "isolate:Start one unit and stop all others"
    "kill:Send signal to processes of a unit"
    "is-active:Check whether units are active"
    "is-failed:Check whether units are failed"
    "status:Show runtime status of one or more units"
    "show:Show properties of one or more units/jobs or the manager"
    "cat:Show the source unit files and drop-ins"
    "reset-failed:Reset failed state for all, one, or more units"
    "list-unit-files:List installed unit files"
    "enable:Enable one or more unit files"
    "disable:Disable one or more unit files"
    "add-wants:Add Wants= dependencies to a unit"
    "add-requires:Add Requires= dependencies to a unit"
    "reenable:Reenable one or more unit files"
    "preset:Enable/disable one or more unit files based on preset configuration"
    "set-default:Set the default target"
    "get-default:Query the default target"
    "edit:Edit one or more unit files"
    "is-system-running:Query overall status of the system"
    "help:Show documentation for specified units"
    "list-dependencies:Show unit dependency tree"
    "mask:Mask one or more units"
    "unmask:Unmask one or more units"
    "link:Link one or more units files into the search path"
    "is-enabled:Check whether unit files are enabled"
    "list-jobs:List jobs"
    "cancel:Cancel all, one, or more jobs"
    "show-environment:Dump environment"
    "set-environment:Set one or more environment variables"
    "unset-environment:Unset one or more environment variables"
    "daemon-reload:Reload systemd manager configuration"
    "daemon-reexec:Reexecute systemd manager"
    "default:Enter system default mode"
    "rescue:Enter system rescue mode"
    "emergency:Enter system emergency mode"
    "halt:Shut down and halt the system"
    "suspend:Suspend the system"
    "poweroff:Shut down and power-off the system"
    "reboot:Shut down and reboot the system"
    "kexec:Shut down and reboot the system with kexec"
    "exit:Ask for user instance termination"
    "switch-root:Change root directory"
    "revert:Revert unit files to their vendor versions"
  )

  if (( CURRENT == 1 )); then
    _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
  else
    local curcontext="$curcontext" expl

    cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
    # Deal with any aliases
    case $cmd in
      condrestart) cmd="try-restart";;
      force-reload) cmd="try-reload-or-restart";;
    esac

    if (( $#cmd )); then
      curcontext="${curcontext%:*:*}:systemctl-${cmd}:"

      local update_policy
      zstyle -s ":completion:${curcontext}:" cache-policy update_policy
      if [[ -z "$update_policy" ]]; then
        zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
      fi

      _call_function ret _systemctl_$cmd || _message 'no more arguments'
    else
      _message "unknown systemctl command: $words[1]"
    fi
    return ret
  fi
}

__systemctl()
{
  systemctl $_sys_service_mgr --full --no-legend --no-pager "$@" 2>/dev/null
}


# Fills the unit list
_systemctl_all_units()
{
  if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS$_sys_service_mgr ) ||
    ! _retrieve_cache SYS_ALL_UNITS$_sys_service_mgr;
  then
    _sys_all_units=( ${${(f)"$(__systemctl list-units --all "$PREFIX*" )"}%% *} )
    _store_cache SYS_ALL_UNITS$_sys_service_mgr _sys_all_units
  fi
}

# Fills the unit list including all file units
_systemctl_really_all_units()
{
  local -a all_unit_files;
  local -a really_all_units;
  if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS$_sys_service_mgr ) ||
    ! _retrieve_cache SYS_REALLY_ALL_UNITS$_sys_service_mgr;
  then
    all_unit_files=( ${${(f)"$(__systemctl list-unit-files "$PREFIX*" )"}%% *} )
    _systemctl_all_units
    really_all_units=($_sys_all_units $all_unit_files)
    _sys_really_all_units=(${(u)really_all_units})
    _store_cache SYS_REALLY_ALL_UNITS$_sys_service_mgr _sys_really_all_units
  fi
}

_filter_units_by_property() {
  local property=$1 value=$2; shift 2
  local -a units; units=("${(q-)@}")
  local -A props
  props=(${(f)"$(_call_program units "$service $_sys_service_mgr show --no-pager --property=\"Id,$property\" -- ${units} 2>/dev/null")"})
  echo -E - "${(@g:o:)${(k@)props[(Re)$property=$value]}#Id=}"
}

_systemctl_get_non_template_names() { echo -E - ${^${(R)${(f)"$(
    __systemctl $mode list-unit-files "$PREFIX*"
    __systemctl $mode list-units --all "$PREFIX*"
  )"}:#*@.*}%%[[:space:]]*} }

_systemctl_get_template_names() { echo -E - ${^${(M)${(f)"$(__systemctl list-unit-files "$PREFIX*" )"}##*@.[^[:space:]]##}%%@.*}@ }


_systemctl_active_units()  {_sys_active_units=(  ${${(f)"$(__systemctl list-units "$PREFIX*" )"}%% *} )}

_systemctl_startable_units(){
  _sys_startable_units=( $( _filter_units_by_property ActiveState inactive $(
    _filter_units_by_property CanStart yes ${${${(f)"$(
      __systemctl $mode list-unit-files --state enabled,enabled-runtime,linked,linked-runtime,static,indirect,disabled,generated,transient "$PREFIX*"
      __systemctl $mode list-units --state inactive,failed "$PREFIX*"
    )"}:#*@.*}%%[[:space:]]*}
  )) )
}

_systemctl_restartable_units(){
  _sys_restartable_units=( $( _filter_units_by_property CanStart yes ${${${(f)"$(
    __systemctl $mode list-unit-files --state enabled,disabled,static "$PREFIX*"
    __systemctl $mode list-units "$PREFIX*"
  )"}:#*@.*}%%[[:space:]]*} ) )
}

_systemctl_failed_units()  {_sys_failed_units=( ${${(f)"$(__systemctl list-units --state=failed "$PREFIX*" )"}%% *} ) }
_systemctl_unit_state() { typeset -gA _sys_unit_state; _sys_unit_state=( $(__systemctl list-unit-files "$PREFIX*" ) ) }

local fun
# Completion functions for ALL_UNITS
for fun in cat mask ; do
  (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
  {
    _systemctl_really_all_units
    _wanted systemd-units expl unit \
      compadd "$@" -a - _sys_really_all_units
  }
done

# Completion functions for NONTEMPLATE_UNITS
for fun in is-active is-failed is-enabled status show preset help list-dependencies edit revert add-wants add-requires ; do
  (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
  {
    _wanted systemd-units expl unit \
      compadd "$@" - $(_systemctl_get_non_template_names)
  }
done

# Completion functions for ENABLED_UNITS
(( $+functions[_systemctl_disable] )) || _systemctl_disable()
{
    local _sys_unit_state; _systemctl_unit_state
    _wanted systemd-units expl 'enabled unit' \
      compadd "$@" - ${(k)_sys_unit_state[(R)enabled]}
}

(( $+functions[_systemctl_reenable] )) || _systemctl_reenable()
{
    local _sys_unit_state; _systemctl_unit_state
    _wanted systemd-units expl 'enabled/disabled unit' \
      compadd "$@" - ${(k)_sys_unit_state[(R)(enabled|disabled)]} $(_systemctl_get_template_names)
}

# Completion functions for DISABLED_UNITS
(( $+functions[_systemctl_enable] )) || _systemctl_enable()
{
  local _sys_unit_state; _systemctl_unit_state
  _wanted systemd-units expl 'disabled unit' \
    compadd "$@" - ${(k)_sys_unit_state[(R)disabled]} $(_systemctl_get_template_names)
}

# Completion functions for FAILED_UNITS
(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
{
  local _sys_failed_units; _systemctl_failed_units
  _wanted systemd-units expl 'failed unit' \
    compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
}

# Completion functions for STARTABLE_UNITS
(( $+functions[_systemctl_start] )) || _systemctl_start()
{
   local _sys_startable_units; _systemctl_startable_units
   _wanted systemd-units expl 'startable unit' \
     compadd "$@" - ${_sys_startable_units[*]}
}

# Completion functions for STOPPABLE_UNITS
for fun in stop kill try-restart condrestart ; do
  (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
  {
    local _sys_active_units; _systemctl_active_units
    _wanted systemd-units expl 'stoppable unit' \
      compadd "$@" - $( _filter_units_by_property CanStop yes \
        ${_sys_active_units[*]} )
  }
done

# Completion functions for ISOLATABLE_UNITS
(( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
{
  _systemctl_all_units
  _wanted systemd-units expl 'isolatable unit' \
    compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
      ${_sys_all_units[*]} )
}

# Completion functions for RELOADABLE_UNITS
for fun in reload try-reload-or-restart force-reload ; do
  (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
  {
    local _sys_active_units; _systemctl_active_units
    _wanted systemd-units expl 'reloadable unit' \
      compadd "$@" - $( _filter_units_by_property CanReload yes \
        ${_sys_active_units[*]} )
  }
done

# Completion functions for RESTARTABLE_UNITS
for fun in restart reload-or-restart ; do
  (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
  {
    local _sys_restartable_units; _systemctl_restartable_units
    _wanted systemd-units expl 'restartable unit' \
      compadd "$@" - ${_sys_restartable_units[*]}
  }
done

# Completion functions for MASKED_UNITS
(( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
{
  local _sys_unit_state; _systemctl_unit_state
  _wanted systemd-units expl 'masked unit' \
    compadd "$@" - ${(k)_sys_unit_state[(R)masked]} || _message "no masked units found"
}

# Completion functions for JOBS
(( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
{
  _wanted systemd-jobs expl job \
    compadd "$@" - ${${(f)"$(__systemctl list-jobs)"}%% *} ||
      _message "no jobs found"
}

# Completion functions for TARGETS
(( $+functions[_systemctl_set-default] )) || _systemctl_set-default()
{
  _wanted systemd-targets expl target \
    compadd "$@" - ${${(f)"$(__systemctl list-unit-files --type target --all "$PREFIX*" )"}%% *} ||
      _message "no targets found"
}

# Completion functions for ENVS
for fun in set-environment unset-environment ; do
  (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
  {
    local fun=$0 ; fun=${fun##_systemctl_}
    local suf
    if [[ "${fun}" = "set-environment" ]]; then
      suf='-S='
    fi
    _wanted systemd-environment expl 'environment variable' \
      compadd "$@" ${suf} - ${${(f)"$(systemctl show-environment)"}%%=*}
  }
done

(( $+functions[_systemctl_link] )) || _systemctl_link() {
   _sd_unit_files
}

(( $+functions[_systemctl_switch-root] )) || _systemctl_switch-root() {
   _files
}

# no systemctl completion for:
#    [STANDALONE]='daemon-reexec daemon-reload default
#                  emergency exit halt kexec list-jobs list-units
#                  list-unit-files poweroff reboot rescue show-environment'

_systemctl_caching_policy()
{
  local _sysunits
  local -a oldcache

  # rebuild if cache is more than a day old
  oldcache=( "$1"(mh+1) )
  (( $#oldcache )) && return 0

  _sysunits=(${${(f)"$(__systemctl --all)"}%% *})

  if (( $#_sysunits )); then
    for unit in $_sysunits; do
      [[ "$unit" -nt "$1" ]] && return 0
    done
  fi

  return 1
}

_unit_states() {
    local -a _states
    _states=("${(fo)$(__systemctl --state=help)}")
    _values -s , "${_states[@]}"
}

_unit_types() {
    local -a _types
    _types=("${(fo)$(__systemctl -t help)}")
    _values -s , "${_types[@]}"
}

_unit_properties() {
  if ( [[ ${+_sys_all_properties} -eq 0 ]] || _cache_invalid SYS_ALL_PROPERTIES$_sys_service_mgr ) ||
    ! _retrieve_cache SYS_ALL_PROPERTIES$_sys_service_mgr;
  then
    _sys_all_properties=( ${${(M)${(f)"$(/usr/lib/systemd/systemd --dump-bus-properties)"}}} )
    _store_cache SYS_ALL_PROPERTIES$_sys_service_mgr _sys_all_properties
  fi
  _values -s , "${_sys_all_properties[@]}"
}

_job_modes() {
    local -a _modes
    _modes=(fail replace replace-irreversibly isolate ignore-dependencies ignore-requirements flush)
    _values -s , "${_modes[@]}"
}

(( $+functions[_systemctl_check_inhibitors] )) ||
    _systemctl_check_inhibitors() {
        local -a _modes
        _modes=(auto yes no)
        _values -s , "${_modes[@]}"
    }

# Build arguments for "systemctl" to be used in completion.
local -a _modes; _modes=("--user" "--system")
# Use the last mode (they are exclusive and the last one is used).
local _sys_service_mgr=${${words:*_modes}[(R)(${(j.|.)_modes})]}
_arguments -s \
    {-h,--help}'[Show help]' \
    '--version[Show package version]' \
    {-t+,--type=}'[List only units of a particular type]:unit type:_unit_types' \
    '--state=[Display units in the specified state]:unit state:_unit_states' \
    '--job-mode=[Specify how to deal with other jobs]:mode:_job_modes' \
    {-p+,--property=}'[Show only properties by specific name]:unit property:_unit_properties' \
    {-a,--all}'[Show all units/properties, including dead/empty ones]' \
    '--reverse[Show reverse dependencies]' \
    '--after[Show units ordered after]' \
    '--before[Show units ordered before]' \
    {-l,--full}"[Don't ellipsize unit names on output]" \
    '--show-types[When showing sockets, show socket type]' \
    '--check-inhibitors[Specify if inhibitors should be checked]:mode:_systemctl_check_inhibitors' \
    {-q,--quiet}'[Suppress output]' \
    '--no-block[Do not wait until operation finished]' \
    '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
    '--no-pager[Do not pipe output into a pager]' \
    '--system[Connect to system manager]' \
    '--user[Connect to user service manager]' \
    "--no-wall[Don't send wall message before halt/power-off/reboot]" \
    '--global[Enable/disable/mask unit files globally]' \
    "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
    '--no-ask-password[Do not ask for system passwords]' \
    '--kill-who=[Who to send signal to]:killwho:(main control all)' \
    {-s+,--signal=}'[Which signal to send]:signal:_signals' \
    {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
    '--root=[Enable/disable/mask unit files in the specified root directory]:directory:_directories' \
    '--runtime[Enable/disable/mask unit files only temporarily until next reboot]' \
    {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
    {-P,--privileged}'[Acquire privileges before execution]' \
    {-n+,--lines=}'[Journal entries to show]:number of entries' \
    {-o+,--output=}'[Change journal output mode]:modes:_sd_outputmodes' \
    '--firmware-setup[Tell the firmware to show the setup menu on next boot]' \
    '--plain[When used with list-dependencies, print output as a list]' \
    '--failed[Show failed units]' \
    '*::systemctl command:_systemctl_command'
PK�����v�g\�t�������site-functions/_localectlnu��[�����������#compdef localectl
# SPDX-License-Identifier: LGPL-2.1+

_localectl_set-locale() {
    local -a _locales locale_fields
    locale_fields=(LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME \
                   LC_COLLATE LC_MONETARY LC_MESSAGES LC_PAPER \
                   LC_NAME LC_ADDRESS LC_TELEPHONE \
                   LC_MEASUREMENT LC_IDENTIFICATION)
    # LC_ALL is omitted on purpose

    local expl suf
    _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
    compset -P1 '*='
    if [[ -prefix 1 *\= ]]; then
        local conf=${PREFIX%%\=*}
        _wanted locales expl "locales configs" \
            _combination localeconfs  confs=$conf locales "$@" -
    else
        compadd -S '=' $locale_fields
    fi
}

_localectl_set-keymap() {
    local -a _keymaps
    if (( CURRENT <= 3 )); then
        _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
        _describe keymaps _keymaps
    else
        _message "no more options"
    fi
}

_localectl_set-x11-keymap() {
    if (( $+commands[pkg-config] )); then
        local -a _file _layout _model _variant _options
        local _xorg_lst
        _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
        _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
        _layout=( ${${${(M)${(f)_file[2]}:#  *}#  }%% *} )
        _model=( ${${${(M)${(f)_file[1]}:#  *}#  }%% *} )
        _variant=( ${${${(M)${(f)_file[3]}:#  *}#  }%% *} )
        _options=( ${${${(M)${(f)_file[4]}:#  *}#  }%% *} )
        #_layout=( ${(f)"$( echo $_file[1] | awk '/^  / {print $1}' )"} )
        #_model=( ${(f)"$(echo $_file[2] | awk '/^  / {print $1}')"} )
        #_variant=( ${(f)"$(echo $_file[3] | awk '/^  / {print $1}')"} )
        #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^  / {print $1}')"} )

        case $CURRENT in
            2) _describe layouts _layout ;;
            3) _describe models _model;;
            4) _describe variants _variant;;
            5) _describe options _options;;
            *) _message "no more options"
        esac
    fi
}

_localectl_command() {
    local -a _localectl_cmds
    _localectl_cmds=(
        'status:Show current locale settings'
        'set-locale:Set system locale'
        'list-locales:Show known locales'
        'set-keymap:Set virtual console keyboard mapping'
        'list-keymaps:Show known virtual console keyboard mappings'
        'set-x11-keymap:Set X11 keyboard mapping'
        'list-x11-keymap-models:Show known X11 keyboard mapping models'
        'list-x11-keymap-layouts:Show known X11 keyboard mapping layouts'
        'list-x11-keymap-variants:Show known X11 keyboard mapping variants'
        'list-x11-keymap-options:Show known X11 keyboard mapping options'
    )
    if (( CURRENT == 1 )); then
        _describe -t commands 'localectl command' _localectl_cmds
    else
        local curcontext="$curcontext"
        cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
        if (( $+functions[_localectl_$cmd] )); then
            _localectl_$cmd
        else
            _message "unknown localectl command: $words[1]"
        fi
    fi
}

_arguments \
    {-h,--help}'[Show this help]' \
    '--version[Show package version]' \
    "--no-convert[Don't convert keyboard mappings]" \
    '--no-pager[Do not pipe output into a pager]' \
    '--no-ask-password[Do not prompt for password]' \
    {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
    {-M+,--machine=}'[Operate on local container]:machine' \
    '*::localectl commands:_localectl_command'
PK�����v�g\�5t����������site-functions/_sd_unit_filesnu��[�����������#autoload
# SPDX-License-Identifier: LGPL-2.1+

_sd_unit_files() {
    local files expl
    files=( '*:files:->files' )

    _description files expl 'unit file'
    _files "$expl[@]" -g '*.(automount|device|mount|path|service|socket|swap|target|timer)'
}
PK�����w�g\ڿ�+!��!����site-functions/_sd_outputmodesnu��[�����������#autoload
# SPDX-License-Identifier: LGPL-2.1+

local -a _output_opts
_output_opts=(short short-full short-iso short-iso-precise short-precise short-monotonic short-unix verbose export json json-pretty json-sse cat with-unit)
_describe -t output 'output mode' _output_opts || compadd "$@"
PK�����w�g\�M��4��4����site-functions/_systemd-deltanu��[�����������#compdef systemd-delta
# SPDX-License-Identifier: LGPL-2.1+

_delta_type() {
    local -a _delta_types
    _delta_types=(masked equivalent redirected overridden unchanged)
    _values -s , "${_delta_types[@]}"
}

_arguments \
    {-h,--help}'[Show this help]' \
    '--version[Show package version]' \
    '--no-pager[Do not pipe output into a pager]' \
    '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
    {-t+,--type=}'[Only display a selected set of override types]:types:_delta_type' \
    ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
PK�����w�g\NJ8j@��@����site-functions/_systemd-runnu��[�����������#compdef systemd-run
# SPDX-License-Identifier: LGPL-2.1+

__systemctl() {
        local -a _modes
        _modes=("--user" "--system")
        systemctl ${words:*_modes} --full --no-legend --no-pager "$@" 2>/dev/null
}

__get_slices () {
        __systemctl list-units --all -t slice \
        | { while read -r a b; do echo $a; done; };
}

__slices () {
        local -a _slices
        _slices=(${(fo)"$(__get_slices)"})
        typeset -U _slices
        _describe 'slices' _slices
}

_arguments \
        {-h,--help}'[Show help message]' \
        '--version[Show package version]' \
        '--user[Run as user unit]' \
        {-H+,--host=}'[Operate on remote host]:[user@]host:_sd_hosts_or_user_at_host' \
        {-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
        '--scope[Run this as scope rather than service]' \
        '--unit=[Run under the specified unit name]:unit name' \
        {-p+,--property=}'[Set unit property]:NAME=VALUE:(( \
                CPUAccounting= MemoryAccounting= BlockIOAccounting= SendSIGHUP= \
                SendSIGKILL= MemoryLimit= CPUShares= BlockIOWeight= User= Group= \
                DevicePolicy= KillMode= DeviceAllow= BlockIOReadBandwidth= \
                BlockIOWriteBandwidth= BlockIODeviceWeight= Nice= Environment= \
                KillSignal= LimitCPU= LimitFSIZE= LimitDATA= LimitSTACK= \
                LimitCORE= LimitRSS= LimitNOFILE= LimitAS= LimitNPROC= \
                LimitMEMLOCK= LimitLOCKS= LimitSIGPENDING= LimitMSGQUEUE= \
                LimitNICE= LimitRTPRIO= LimitRTTIME= PrivateTmp= PrivateDevices= \
                PrivateNetwork= NoNewPrivileges= WorkingDirectory= RootDirectory= \
                TTYPath= SyslogIdentifier= SyslogLevelPrefix= SyslogLevel= \
                SyslogFacility= TimerSlackNSec= OOMScoreAdjust= ReadWritePaths= \
                ReadOnlyPaths= InaccessiblePaths= EnvironmentFile= \
                ProtectSystem= ProtectHome= RuntimeDirectory= PassEnvironment= \
                ))' \
        '--description=[Description for unit]:description' \
        '--slice=[Run in the specified slice]:slices:__slices' \
        {-r,--remain-after-exit}'[Leave service around until explicitly stopped]' \
        '--send-sighup[Send SIGHUP when terminating]' \
        '--service-type=[Service type]:type:(simple forking oneshot dbus notify idle)' \
        '--uid=[Run as system user]:user:_users' \
        '--gid=[Run as system group]:group:_groups' \
        '--nice=[Nice level]:nice level' \
        '--setenv=[Set environment]:NAME=VALUE' \
        '--on-active=[Run after SEC seconds]:SEC' \
        '--on-boot=[Run SEC seconds after machine was booted up]:SEC' \
        '--on-startup=[Run SEC seconds after systemd was first started]:SEC' \
        '--on-unit-active=[Run SEC seconds after the last activation]:SEC' \
        '--on-unit-inactive=[Run SEC seconds after the last deactivation]:SEC' \
        '--on-calendar=[Realtime timer]:SPEC' \
        '--timer-property=[Set timer unit property]:NAME=VALUE' \
        '--wait=[Wait until service stopped again]' \
        '*::command:_command'
PK�����x�g\B�V�.��.����site-functions/_coredumpctlnu��[�����������#compdef coredumpctl
# SPDX-License-Identifier: LGPL-2.1+

_coredumpctl_command(){
    local -a _coredumpctl_cmds
    _coredumpctl_cmds=(
            'list:List available coredumps'
            'info:Show detailed information about one or more coredumps'
            'dump:Print coredump to stdout'
            'gdb:Start gdb on a coredump'
    )
    if (( CURRENT == 1 )); then
        _describe -t commands 'coredumpctl command' _coredumpctl_cmds
    else
        local curcontext="$curcontext"
        local -a _dumps
        cmd="${${_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
        if (( $#cmd  )); then
            _dumps=( "${(f)$(coredumpctl list --no-legend | awk 'BEGIN{OFS=":"} {sub(/[[ \t]+/, ""); print $4,$0}' 2>/dev/null)}" )
            if [[ -n "$_dumps" ]]; then
                _describe -V -t pids 'coredumps' _dumps
            else
                _message "no coredumps"
            fi
        else
            _message "no more options"
        fi
    fi
}

_arguments \
    {-o+,--output=}'[Write output to FILE]:output file:_files' \
    {-F+,--field=}'[Show field in list output]:field' \
    '-1[Show information about most recent entry only]' \
    {-S,--since}'[Print entries since the specified date]' \
    {-U,--until}'[Print entries until the specified date]' \
    {-r,--reverse}'[Show the newest entries first]' \
    '--no-pager[Do not pipe output into a pager]' \
    '--no-legend[Do not print the column headers]' \
    {-h,--help}'[Show this help]' \
    '--version[Show package version]' \
    '*::coredumpctl commands:_coredumpctl_command'
PK�����x�g\K�g%��%����site-functions/_systemd-inhibitnu��[�����������#compdef systemd-inhibit
# SPDX-License-Identifier: LGPL-2.1+

_systemd_inhibit_command(){
    if (( CURRENT == 1 )); then
        compset -q
        _normal
    else
        local n=${words[(b:2:i)[^-]*]}
        if (( n <= CURRENT )); then
            compset -n $n
            _alternative \
                'files:file:_files' \
                'commands:command:_normal' && return 0
        fi
        _default
    fi
}

_inhibit_what() {
    local _inhibit
    _inhibit=(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)
    _values -s : "${_inhibit[@]}"
}

_arguments \
    {-h,--help}'[Show this help]' \
    '--version[Show package version]' \
    '--what=[Operations to inhibit]:options:_inhibit_what' \
    '--who=[A descriptive string who is inhibiting]:who is inhibiting:' \
    '--why=[A descriptive string why is being inhibited]:reason for the lock:' \
    '--mode=[One of block or delay]:lock mode:( block delay )' \
    '--list[List active inhibitors]' \
    '*:commands:_systemd_inhibit_command'
PK�����x�g\�v���������site-functions/_systemd-analyzenu��[�����������#compdef systemd-analyze
# SPDX-License-Identifier: LGPL-2.1+

_systemd_analyze_log-level() {
    local -a _levels
    _levels=(debug info notice warning err crit alert emerg)
    _describe -t level 'logging level' _levels || compadd "$@"
}

_systemd_analyze_log-target() {
    local -a _targets
    _targets=(console journal kmsg journal-or-kmsg null)
    _describe -t target 'logging target' _targets || compadd "$@"
}

_systemd_analyze_verify() {
    _sd_unit_files
}

_systemd_analyze_service-watchdogs() {
    local -a _states
    _states=(on off)
    _describe -t state 'state' _states || compadd "$@"
}

_systemd_analyze_command(){
    local -a _systemd_analyze_cmds
    # Descriptions taken from systemd-analyze --help.
    _systemd_analyze_cmds=(
        'time:Print time spent in the kernel before reaching userspace'
        'blame:Print list of running units ordered by time to init'
        'critical-chain:Print a tree of the time critical chain of units'
        'plot:Output SVG graphic showing service initialization'
        'dot:Dump dependency graph (in dot(1) format)'
        'dump:Dump server status'
        'unit-paths:List unit load paths'
        'log-level:Get/set systemd log threshold'
        'log-target:Get/set systemd log target'
        'service-watchdogs:Get/set service watchdog status'
        'syscall-filter:List syscalls in seccomp filter'
        'verify:Check unit files for correctness'
        'calendar:Validate repetitive calendar time events'
    )

    if (( CURRENT == 1 )); then
        _describe "options" _systemd_analyze_cmds
    else
        local curcontext="$curcontext"
        cmd="${${_systemd_analyze_cmds[(r)$words[1]:*]%%:*}}"
        if (( $#cmd )); then
            if (( $+functions[_systemd_analyze_$cmd] )) && (( CURRENT == 2 )); then
                _systemd_analyze_$cmd
            else
                _message "no more options"
            fi
        else
            _message "unknown systemd-analyze command: $words[1]"
        fi
    fi
}

_arguments \
    {-h,--help}'[Show help text]' \
    '--version[Show package version]' \
    '--system[Operate on system systemd instance]' \
    '--user[Operate on user systemd instance]' \
    '--global[Show global user instance config]' \
    '--no-pager[Do not pipe output into a pager]' \
    '--man=[Do (not) check for existence of man pages]:boolean:(1 0)' \
    '--order[When generating graph for dot, show only order]' \
    '--require[When generating graph for dot, show only requirement]' \
    '--fuzz=[When printing the tree of the critical chain, print also services, which finished TIMESPAN earlier, than the latest in the branch]:TIMESPAN' \
    '--from-pattern=[When generating a dependency graph, filter only origins]:GLOB' \
    '--to-pattern=[When generating a dependency graph, filter only destinations]:GLOB' \
    {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
    {-M+,--machine=}'[Operate on local container]:machine:_sd_machines' \
    '*::systemd-analyze commands:_systemd_analyze_command'
PK�����x�g\��s?c��c����site-functions/_sd_machinesnu��[�����������#autoload
# SPDX-License-Identifier: LGPL-2.1+
__get_machines () {
        machinectl --full --no-legend --no-pager list |  {while read -r a b; do echo $a; done;};
}

local -a _machines
_machines=("${(fo)$(__get_machines)}")
typeset -U _machines
if [[ -n "$_machines" ]]; then
        _describe 'machines' _machines
else
        _message 'no machines'
fi
PK�����y�g\�Wt��������site-functions/_timedatectlnu��[�����������#compdef timedatectl
# SPDX-License-Identifier: LGPL-2.1+

_timedatectl_set-timezone(){
    local -a _timezones
    _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
    compadd "$_timezones[@]"
}

_timedatectl_set-time(){
    _message "YYYY-MM-DD HH:MM:SS"
}

_timedatectl_set-local-rtc(){
    local -a _options
    _options=(
        '0:Maintain RTC in universal time'
        '1:Maintain RTC in local time'
    )
    _describe options _options
}

_timedatectl_set-ntp(){
    local -a _options
    _options=(
        '0:Disable NTP based network time configuration'
        '1:Enable NTP based network time configuration'
    )
    _describe options _options
}

_timedatectl_command(){
    local -a _timedatectl_cmds
    _timedatectl_cmds=(
        'status:Show current time settings'
        'set-time:Set system time'
        'set-timezone:Set system timezone'
        'list-timezones:Show known timezones'
        'set-local-rtc:Control whether RTC is in local time'
        'set-ntp:Control whether NTP is enabled'
    )
    if (( CURRENT == 1 )); then
        _describe -t commands 'timedatectl command' _timedatectl_cmds
    else
        local curcontext="$curcontext"
        cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
        if (( $#cmd )); then
            if (( $+functions[_timedatectl_$cmd] )); then
                _timedatectl_$cmd
            else
                _message "no more options"
            fi
        else
            _message "unknown timedatectl command: $words[1]"
        fi
    fi
}

_arguments -s \
    {-h,--help}'[Show this help]' \
    '--version[Show package version]' \
    '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
    '--no-pager[Do not pipe output into a pager]' \
    '--no-ask-password[Do not prompt for password]' \
    {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
    {-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
    '*::timedatectl commands:_timedatectl_command'
PK�����y�g\
#Ƽ������ ��site-functions/_systemd-tmpfilesnu��[�����������#compdef systemd-tmpfiles
# SPDX-License-Identifier: LGPL-2.1+

_arguments \
    {-h,--help}'[Show help]' \
    '--version[Show package version]' \
    '--create[Create, set ownership/permissions based on the config files.]' \
    '--clean[Clean up all files and directories with an age parameter configured.]' \
    '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
    '--boot[Execute actions only safe at boot]' \
    '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
    '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
    '--root=[Operate on an alternate filesystem root]:directory:_directories' \
    '*::files:_files'
PK�����y�g\�Em��m����site-functions/_udevadmnu��[�����������#compdef udevadm
# SPDX-License-Identifier: LGPL-2.1+

_udevadm_info(){
    _arguments \
        '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
        '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
        '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
        '--root[Print absolute paths in name or symlink query.]' \
        '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
        '--export[Print output as key/value pairs.]' \
        '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
        '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
        '--export-db[Export the content of the udev database.]' \
        '--cleanup-db[Cleanup the udev database.]'
}

_udevadm_trigger(){
    _arguments \
        '--verbose[Print the list of devices which will be triggered.]' \
        '--dry-run[Do not actually trigger the event.]' \
        '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
        '--action=[Type of event to be triggered.]:actions:(add change remove)' \
        '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
        '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
        '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
        '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
        '--property-match=[Trigger events for devices with a matching property value.]' \
        '--tag-match=property[Trigger events for devices with a matching tag.]' \
        '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
        '--parent-match=[Trigger events for all children of a given device.]'
}

_udevadm_settle(){
    _arguments \
       '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
       '--seq-start=[Wait only for events after the given sequence number.]' \
       '--seq-end=[Wait only for events before the given sequence number.]' \
       '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
       '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
       '--help[Print help text.]'
}

_udevadm_control(){
    _arguments \
        '--exit[Signal and wait for systemd-udevd to exit.]' \
        '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
        '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
        '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
        '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
        '--property=[Set a global property for all events.]' \
        '--children-max=[Set the maximum number of events.]' \
        '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
        '--help[Print help text.]'
}

_udevadm_monitor(){
    _arguments \
        '--kernel[Print the kernel uevents.]' \
        '--udev[Print the udev event after the rule processing.]' \
        '--property[Also print the properties of the event.]' \
        '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
        '--tag-match=[Filter events by property.]' \
        '--help[Print help text.]'
}

_udevadm_test(){
    _arguments \
        '--action=[The action string.]:actions:(add change remove)' \
        '--subsystem=[The subsystem string.]' \
        '--help[Print help text.]' \
        '*::devpath:_files -P /sys/ -W /sys'
}

_udevadm_test-builtin(){
    if (( CURRENT == 2 )); then
    _arguments \
        '--help[Print help text]' \
        '*::builtins:(blkid btrfs hwdb input_id net_id net_setup_link kmod path_id usb_id uaccess)'
    elif  (( CURRENT == 3 )); then
        _arguments \
            '--help[Print help text]' \
            '*::syspath:_files -P /sys -W /sys'
    else
        _arguments \
            '--help[Print help text]'
    fi
}

_udevadm_mounts(){
  local dev_tmp dpath_tmp mp_tmp mline

    tmp=( "${(@f)$(< /proc/self/mounts)}" )
    dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
    mp_tmp=( "${(@)${(@)tmp#* }%% *}" )

  local MATCH
  mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
  dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
  dev_tmp=( "${(@q)dev_tmp:#/*}" )

  _alternative \
    'device-paths: device path:compadd -a dpath_tmp' \
    'directories:mount point:compadd -a mp_tmp'
}


_udevadm_command(){
    local -a _udevadm_cmds
    _udevadm_cmds=(
        'info:query sysfs or the udev database'
        'trigger:request events from the kernel'
        'settle:wait for the event queue to finish'
        'control:control the udev daemon'
        'monitor:listen to kernel and udev events'
        'test:test an event run'
        'test-builtin:test a built-in command'
    )

    if ((CURRENT == 1)); then
        _describe -t commands 'udevadm commands' _udevadm_cmds
    else
        local curcontext="$curcontext"
        cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
        if (($#cmd)); then
            if (( $+functions[_udevadm_$cmd] )); then
                _udevadm_$cmd
            else
                _message "no options for $cmd"
            fi
        else
            _message "no more options"
        fi
    fi
}


_arguments \
    '--debug[Print debug messages to stderr]' \
    '--version[Print version number]' \
    '--help[Print help text]' \
    '*::udevadm commands:_udevadm_command'
PK�����y�g\�dU4��������site-functions/_kernel-installnu��[�����������#compdef kernel-install
# SPDX-License-Identifier: LGPL-2.1+

_images(){
    if [[ "$words[2]" == "remove" ]]; then
        _message 'No more options'
    else
        _path_files -W /boot/ -P /boot/ -g "vmlinuz-*"
    fi
}

_kernels(){
    read _MACHINE_ID < /etc/machine-id
    _kernel=( /lib/modules/[0-9]* )
    if [[ "$cmd" == "remove" && -n "$_MACHINE_ID" ]]; then
        _kernel=( "/boot/$_MACHINE_ID"/[0-9]* )
    fi
    _kernel=( ${_kernel##*/} )
    _describe "installed kernels" _kernel
}

_arguments \
    '1::add or remove:(add remove)' \
    '2::kernel versions:_kernels' \
    '3::kernel images:_images'

#vim: set ft=zsh sw=4 ts=4 et
PK�����z�g\�W4��������site-functions/_systemdnu��[�����������#compdef systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-detect-virt systemd-machine-id-setup systemd-notify systemd-tty-ask-password-agent
# SPDX-License-Identifier: LGPL-2.1+

local curcontext="$curcontext" state lstate line
case "$service" in
    systemd-ask-password)
        _arguments \
            {-h,--help}'[Show this help]' \
            '--icon=[Icon name]:icon name:' \
            '--timeout=[Timeout in sec]:timeout (seconds):' \
            '--no-tty[Ask question via agent even on TTY]' \
            '--accept-cached[Accept cached passwords]' \
            '--multiple[List multiple passwords if available]'
    ;;
    systemd-cat)
        _arguments \
            {-h,--help}'[Show this help]' \
            '--version[Show package version.]' \
            {-t+,--identifier=}'[Set syslog identifier.]:syslog identifier:' \
            {-p+,--priority=}'[Set priority value.]:value:({0..7})' \
            '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
            ':Message'
    ;;
    systemd-cgls)
        _arguments \
            {-h,--help}'[Show this help]' \
            '--version[Show package version]' \
            '--no-pager[Do not pipe output into a pager]' \
            {-a,--all}'[Show all groups, including empty]' \
            '-k[Include kernel threads in output]' \
            ':cgroups:(cpuset cpu cpuacct memory devices freezer blkio)'
    ;;
    systemd-cgtop)
        _arguments \
            {-h,--help}'[Show this help]' \
            '--version[Print version and exit]' \
            '(-c -m -i -t)-p[Order by path]' \
            '(-c -p -m -i)-t[Order by number of tasks]' \
            '(-m -p -i -t)-c[Order by CPU load]' \
            '(-c -p -i -t)-m[Order by memory load]' \
            '(-c -m -p -t)-i[Order by IO load]' \
            {-d+,--delay=}'[Specify delay]:delay:' \
            {-n+,--iterations=}'[Run for N iterations before exiting]:number of iterations:' \
            {-b,--batch}'[Run in batch mode, accepting no input]' \
            '--depth=[Maximum traversal depth]:maximum depth:'
    ;;
    systemd-detect-virt)
        _arguments \
            {-h,--help}'[Show this help]' \
            '--version[Show package version]' \
            {-c,--container}'[Only detect whether we are run in a container]' \
            {-v,--vm}'[Only detect whether we are run in a VM]' \
            {-q,--quiet}"[Don't output anything, just set return value]"
    ;;
    systemd-machine-id-setup)
        _arguments \
            {-h,--help}'[Show this help]' \
            '--version[Show package version]'
    ;;
    systemd-notify)
        _arguments \
            {-h,--help}'[Show this help]' \
            '--version[Show package version]' \
            '--ready[Inform the init system about service start-up completion.]' \
            '--pid=[Inform the init system about the main PID of the daemon]:daemon main PID:_pids' \
            '--status=[Send a free-form status string for the daemon to the init systemd]:status string:' \
            '--booted[Returns 0 if the system was booted up with systemd]'
    ;;
    systemd-tty-ask-password-agent)
        _arguments \
            {-h,--help}'[Prints a short help text and exits.]' \
            '--version[Prints a short version string and exits.]' \
            '--list[Lists all currently pending system password requests.]' \
            '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
            '--watch[Continuously process password requests.]' \
            '--wall[Forward password requests to wall(1).]' \
            '--plymouth[Ask question with plymouth(8).]' \
            '--console[Ask question on /dev/console.]'
    ;;
    *) _message 'eh?' ;;
esac

#vim: set ft=zsh sw=4 ts=4 et
PK�����z�g\�\����������site-functions/_loginctlnu��[�����������#compdef loginctl
# SPDX-License-Identifier: LGPL-2.1+

_loginctl_all_sessions() {
  local session description
  loginctl --no-legend list-sessions | while read -r session description; do
    _sys_all_sessions+=( "$session" )
    _sys_all_sessions_descr+=( "${session}:$description" )
  done
}

_loginctl_all_users() {
  local uid description
  loginctl --no-legend list-users | while read -r uid description; do
    _sys_all_users+=( "$uid" )
    _sys_all_users_descr+=( "${uid}:$description" )
  done
}

_loginctl_all_seats() {
  local seat description
  loginctl --no-legend list-seats | while read -r seat description; do
    _sys_all_seats+=( "$seat" )
    _sys_all_seats_descr+=( "${seat}:$description" )
  done
}

local fun
# Completion functions for SESSIONS
for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
  (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
  {
    local -a _sys_all_sessions{,_descr}

    _loginctl_all_sessions
    for _ignore in $words[2,-1]; do
      _sys_all_sessions[(i)$_ignore]=()
      _sys_all_sessions_descr[(i)$_ignore:*]=()
    done

    if zstyle -T ":completion:${curcontext}:systemd-sessions" verbose; then
      _describe -t systemd-sessions session _sys_all_sessions_descr _sys_all_sessions "$@"
    else
      local expl
      _wanted systemd-sessions expl session compadd "$@" -a _sys_all_sessions
    fi
  }
done

# Completion functions for USERS
for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
  (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
  {
    local -a _sys_all_users{,_descr}
    zstyle -a ":completion:${curcontext}:users" users _sys_all_users

    if ! (( $#_sys_all_users )); then
      _loginctl_all_users
    fi

    for _ignore in $words[2,-1]; do
      _sys_all_users[(i)$_ignore]=()
      _sys_all_users_descr[(i)$_ignore:*]=()
    done

    # using the common tag `users' here, not rolling our own `systemd-users' tag
    if zstyle -T ":completion:${curcontext}:users" verbose; then
      _describe -t users user ${_sys_all_users_descr:+_sys_all_users_descr} _sys_all_users "$@"
    else
      local expl
      _wanted users expl user compadd "$@" -a _sys_all_users
    fi
  }
done

# Completion functions for SEATS
(( $+functions[_loginctl_seats] )) || _loginctl_seats()
{
  local -a _sys_all_seats{,_descr}

  _loginctl_all_seats
  for _ignore in $words[2,-1]; do
    _sys_all_seats[(i)$_ignore]=()
    _sys_all_seats_descr[(i)$_ignore:*]=()
  done

  if zstyle -T ":completion:${curcontext}:systemd-seats" verbose; then
    _describe -t systemd-seats seat _sys_all_seats_descr _sys_all_seats "$@"
  else
    local expl
    _wanted systemd-seats expl seat compadd "$@" -a _sys_all_seats
  fi
}
for fun in seat-status show-seat terminate-seat ; do
  (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
  { _loginctl_seats }
done

# Completion functions for ATTACH
(( $+functions[_loginctl_attach] )) || _loginctl_attach()
{
  _arguments -w -C -S -s \
    ':seat:_loginctl_seats' \
    '*:device:_files'
}

# no loginctl completion for:
# [STANDALONE]='list-sessions list-users list-seats flush-devices'

(( $+functions[_loginctl_command] )) || _loginctl_command()
{
  local -a _loginctl_cmds
  _loginctl_cmds=(
    "list-sessions:List sessions"
    "session-status:Show session status"
    "show-session:Show properties of one or more sessions"
    "activate:Activate a session"
    "lock-session:Screen lock one or more sessions"
    "unlock-session:Screen unlock one or more sessions"
    "lock-sessions:Screen lock all current sessions"
    "unlock-sessions:Screen unlock all current sessions"
    "terminate-session:Terminate one or more sessions"
    "kill-session:Send signal to processes of a session"
    "list-users:List users"
    "user-status:Show user status"
    "show-user:Show properties of one or more users"
    "enable-linger:Enable linger state of one or more users"
    "disable-linger:Disable linger state of one or more users"
    "terminate-user:Terminate all sessions of one or more users"
    "kill-user:Send signal to processes of a user"
    "list-seats:List seats"
    "seat-status:Show seat status"
    "show-seat:Show properties of one or more seats"
    "attach:Attach one or more devices to a seat"
    "flush-devices:Flush all device associations"
    "terminate-seat:Terminate all sessions on one or more seats"
  )

  if (( CURRENT == 1 )); then
    _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
  else
    local curcontext="$curcontext" _ignore

    cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"

    if (( $#cmd )); then
      curcontext="${curcontext%:*:*}:loginctl-${cmd}:"

      _call_function ret _loginctl_$cmd || _message 'no more arguments'
    else
      _message "unknown loginctl command: $words[1]"
    fi
    return ret
  fi
}


_arguments -s \
    {-h,--help}'[Show help]' \
    '--version[Show package version]' \
    \*{-p+,--property=}'[Show only properties by this name]:unit property' \
    {-a,--all}'[Show all properties, including empty ones]' \
    '--kill-who=[Who to send signal to]:killwho:(main control all)' \
    {-s+,--signal=}'[Which signal to send]:signal:_signals' \
    {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
    {-M+,--machine=}'[Operate on local container]:machine:_sd_machines' \
    {-l,--full}'[Do not ellipsize output]' \
    '--no-pager[Do not pipe output into a pager]' \
    '--no-legend[Do not show the headers and footers]' \
    '--no-ask-password[Do not ask for system passwords]' \
    {-n+,--lines=}'[Number of journal entries to show]' \
    {-o+,--output=}'[Change journal output mode]:output modes:_sd_outputmodes' \
    '*::loginctl command:_loginctl_command'
PK�����z�g\:�i�W��W����site-functions/_journalctlnu��[�����������#compdef journalctl
# SPDX-License-Identifier: LGPL-2.1+

_list_fields() {
    local -a journal_fields
    journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
                    ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
                    _{P,U,G}ID _COMM _EXE _CMDLINE
                    _AUDIT_{SESSION,LOGINUID}
                    _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
                    _SYSTEMD_USER_UNIT USER_UNIT
                    _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
                    _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
                    _KERNEL_{DEVICE,SUBSYSTEM}
                    _UDEV_{SYSNAME,DEVNODE,DEVLINK}
                    __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
    case $_jrnl_none in
        yes) _values -s '=' 'possible fields' \
                "${journal_fields[@]}:value:_journal_fields ${words[CURRENT]%%=*}" ;;
        *)  _describe 'possible fields' journal_fields ;;
    esac
}

_journal_none() {
    local -a _commands _files _jrnl_none
    # Setting use-cache will slow this down considerably
    _commands=( ${"$(_call_program commands "$service $_sys_service_mgr -F _EXE" 2>/dev/null)"} )
    _jrnl_none='yes'
    _alternative : \
        'files:/dev files:_files -W /dev -P /dev/' \
        "commands:commands:($_commands[@])" \
        'fields:fields:_list_fields'
}

_journal_fields() {
    local -a _fields cmd
    cmd=("journalctl $_sys_service_mgr" "-F ${@[-1]}" "2>/dev/null" )
    _fields=$(_call_program fields $cmd[@])
    _fields=${_fields//'\'/'\\'}
    _fields=${_fields//':'/'\:'}
    _fields=( ${(f)_fields} )
    typeset -U _fields
    _describe 'possible values' _fields
}

_journal_boots() {
  local -a _bootid _previousboots
  _bootid=( ${(f)"$(_call_program bootid "$service -F _BOOT_ID")"}  )
  _previousboots=( -{1..${#_bootid}} )
  _alternative : \
    "offsets:boot offsets:compadd -a '_previousboots[1,-2]'" \
    "bootid:boot ids:compadd -a _bootid"
}

# Build arguments for "journalctl" to be used in completion.
# Use both --user and --system modes, they are not exclusive.
local -a _modes; _modes=(--user --system)
local -a _modes_with_arg; _modes_with_arg=(--directory -D --file -M --machine --root)
typeset -a _sys_service_mgr
local w k v i=0 n=$#words
while (( i++ < n )); do
    w=$words[$i]
    if (( $_modes[(I)$w] )); then
        _sys_service_mgr+=($w)
    else
        # Handle options with arguments. "--key=value" and "--key value".
        k=${w%%=*}
        if (( ${_modes_with_arg[(I)$k]} )); then
            v=${w#*=}
            if [[ "$k" != "$w" ]]; then
                # "--key=value" style.
                _sys_service_mgr+=($w)
            else
                # "--key value" style.
                _sys_service_mgr+=($w ${words[((++i))]})
            fi
        fi
    fi
done
_arguments -s \
    {-h,--help}'[Show this help]' \
    '--version[Show package version]' \
    '--no-pager[Do not pipe output into a pager]' \
    {-l,--full}'[Show long fields in full]' \
    {-a,--all}'[Show all fields, including long and unprintable]' \
    {-f,--follow}'[Follow journal]' \
    {-e,--pager-end}'[Jump to the end of the journal in the pager]' \
    {-n+,--lines=}'[Number of journal entries to show]:integer' \
    '--no-tail[Show all lines, even in follow mode]' \
    {-r,--reverse}'[Reverse output]' \
    {-o+,--output=}'[Change journal output mode]:output modes:_sd_outputmodes' \
    {-x,--catalog}'[Show explanatory texts with each log line]' \
    {-q,--quiet}"[Don't show privilege warning]" \
    {-m,--merge}'[Show entries from all available journals]' \
    {-b+,--boot=}'[Show data only from the specified boot or offset]::boot id or offset:_journal_boots' \
    '--list-boots[List boots ordered by time]' \
    {-k,--dmesg}'[Show only kernel messages from the current boot]' \
    {-u+,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
    '--user-unit=[Show data only from the specified user session unit]:units:_journal_fields USER_UNIT' \
    {-p+,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
    {-t+,--identifier=}'[Show only messages with the specified syslog identifier]:identifier:_journal_fields SYSLOG_IDENTIFIER' \
    {-c+,--cursor=}'[Start showing entries from the specified cursor]:cursors:_journal_fields __CURSORS' \
    '--after-cursor=[Start showing entries from after the specified cursor]:cursors:_journal_fields __CURSORS' \
    '--since=[Start showing entries on or newer than the specified date]:YYYY-MM-DD HH\:MM\:SS' \
    '--until=[Stop showing entries on or older than the specified date]:YYYY-MM-DD HH\:MM\:SS' \
    {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
    '--system[Show system and kernel messages]' \
    '--user[Show messages from user services]' \
    '(--directory -D -M --machine --root --file)'{-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
    '(--directory -D -M --machine --root --file)'{-D+,--directory=}'[Show journal files from directory]:directories:_directories' \
    '(--directory -D -M --machine --root --file)--root=[Operate on catalog hierarchy under specified directory]:directories:_directories' \
    '(--directory -D -M --machine --root)*--file=[Operate on specified journal files]:file:_files' \
    '--new-id128[Generate a new 128 Bit ID]' \
    '--header[Show journal header information]' \
    '--disk-usage[Show total disk usage]' \
    '--list-catalog[List messages in catalog]' \
    '--dump-catalog[Dump messages in catalog]' \
    '--update-catalog[Update binary catalog database]' \
    '--setup-keys[Generate a new FSS key pair]' \
    '--force[Force recreation of the FSS keys]' \
    '--interval=[Time interval for changing the FSS sealing key]:time interval' \
    '--verify[Verify journal file consistency]' \
    '--verify-key=[Specify FSS verification key]:FSS key' \
    '*::default: _journal_none'
PK�����{�g\PΪ��������site-functions/_libinputnu��[�����������#compdef libinput

(( $+functions[_libinput_commands] )) || _libinput_commands()
{
	local -a commands
	commands=(
		"list-devices:List all devices recognized by libinput"
		"debug-events:Print all events as seen by libinput"
		"debug-gui:Show a GUI to visualize libinput's events"
		"debug-tablet:Show tablet axis and button values"
		"measure:Measure various properties of devices"
		"analyze:Analyze device data"
		"record:Record the events from a device"
		"replay:Replay the events from a device"
	)

	_describe -t commands 'command' commands
}

__all_seats()
{
	# Obviously only works with logind
	local -a seats
	seats=${(f)"$(loginctl --no-legend --no-pager list-seats 2>/dev/null)"}
	if [[ -z $seats ]]; then
		# Can always offer seat0, even if we can't enumerate the seats
		compadd "$@" - seat0
	else
		compadd "$@" - $seats
	fi
}

(( $+functions[_libinput_list-devices] )) || _libinput_list-devices()
{
	_arguments \
		'--help[Show help and exit]' \
		'--version[show version information and exit]'
}

(( $+functions[_libinput_debug-events] )) || _libinput_debug-events()
{
	_arguments \
		'--help[Show debug-events help and exit]' \
		'--quiet[Only print libinput messages and nothing from this tool]' \
		'--verbose[Use verbose output]' \
		'--show-keycodes[Make all keycodes visible]' \
		'--grab[Exclusively grab all opened devices]' \
		'--device=[Use the given device with the path backend]:device:_files -W /dev/input/ -P /dev/input/' \
		'--udev=[Listen for notifications on the given seat]:seat:__all_seats' \
		'--apply-to=[Apply configuration options where the device name matches the pattern]:pattern' \
		'--disable-sendevents=[Disable send-events option for the devices matching the pattern]:pattern' \
		'--set-click-method=[Set the desired click method]:click-method:(none clickfinger buttonareas)' \
		'--set-scroll-method=[Set the desired scroll method]:scroll-method:(none twofinger edge button)' \
		'--set-scroll-button=[Set the button to the given button code]' \
		'--set-profile=[Set pointer acceleration profile]:accel-profile:(adaptive flat)' \
		'--set-speed=[Set pointer acceleration speed (within range \[-1, 1\])]' \
		'--set-tap-map=[Set button mapping for tapping]:tap-map:((  \
			lrm\:2-fingers\ right-click\ /\ 3-fingers\ middle-click \
			lmr\:2-fingers\ middle-click\ /\ 3-fingers\ right-click \
		))' \
		+ '(tap-to-click)' \
		'--enable-tap[Enable tap-to-click]' \
		'--disable-tap[Disable tap-to-click]' \
		+ '(drag)' \
		'--enable-drag[Enable tap-and-drag]' \
		'--disable-drag[Disable tap-and-drag]' \
		+ '(drag-lock)' \
		'--enable-drag-lock[Enable drag-lock]' \
		'--disable-drag-lock[Disable drag-lock]' \
		+ '(natural-scrolling)' \
		'--enable-natural-scrolling[Enable natural scrolling]' \
		'--disable-natural-scrolling[Disable natural scrolling]' \
		+ '(left-handed)' \
		'--enable-left-handed[Enable left handed button configuration]' \
		'--disable-left-handed[Disable left handed button configuration]' \
		+ '(middlebutton)' \
		'--enable-middlebutton[Enable middle button emulation]' \
		'--disable-middlebutton[Disable middle button emulation]' \
		+ '(dwt)' \
		'--enable-dwt[Enable disable-while-typing]' \
		'--disable-dwt[Disable disable-while-typing]'
}

(( $+functions[_libinput_debug-gui] )) || _libinput_debug-gui()
{
	_arguments \
		'--help[Show debug-gui help and exit]' \
		'--verbose[Use verbose output]' \
		'--grab[Exclusively grab all opened devices]' \
		'--device=[Use the given device with the path backend]:device:_files -W /dev/input/ -P /dev/input/' \
		'--udev=[Listen for notifications on the given seat]:seat:_libinput_all_seats'
}

(( $+functions[_libinput_debug-tablet] )) || _libinput_debug-tablet()
{
	_arguments \
		'--help[Show debug-tablet help and exit]' \
		'--device=[Use the given device with the path backend]:device:_files -W /dev/input/ -P /dev/input/' \
		'--udev=[Use the first tablet device on the given seat]:seat:_libinput_all_seats'
}


(( $+functions[_libinput_measure] )) || _libinput_measure()
{
	local curcontext=$curcontext state line ret=1
	local features
	features=(
		"fuzz:Measure touch fuzz to avoid pointer jitter"
		"touch-size:Measure touch size and orientation"
		"touchpad-tap:Measure tap-to-click time"
		"touchpad-pressure:Measure touch pressure"
	)

	_arguments -C \
		'--help[Print help and exit]' \
		':feature:->feature' \
		'*:: :->option-or-argument'

	case $state in
		(feature)
			_describe -t features 'feature' features
			;;
		(option-or-argument)
			curcontext=${curcontext%:*:*}:libinput-measure-$words[1]:
			if ! _call_function ret _libinput_measure_$words[1]; then
				_message "unknown feature: $words[1]"
			fi
			;;
	esac
	return ret
}

(( $+functions[_libinput_measure_fuzz] )) || _libinput_measure_fuzz()
{
	_arguments \
		'--help[Show help message and exit]' \
		':device:_files -W /dev/input/ -P /dev/input/'
}

(( $+functions[_libinput_measure_touch-size] )) || _libinput_measure_touch-size()
{
	_arguments \
		'--help[Show help message and exit]' \
		'--touch-threshold=[Assume a touch pressure threshold of "down:up"]' \
		'--palm-threshold=[Assume a palm threshold of N]' \
		':device:_files -W /dev/input/ -P /dev/input/'
}

(( $+functions[_libinput_measure_touchpad-pressure] )) || _libinput_measure_touchpad-pressure()
{
	_arguments \
		'--help[Show help message and exit]' \
		'--touch-threshold=[Assume a touch pressure threshold of "down:up"]' \
		'--palm-threshold=[Assume a palm threshold of N]' \
		':device:_files -W /dev/input/ -P /dev/input/'
}

(( $+functions[_libinput_measure_touchpad-tap] )) || _libinput_measure_touchpad-tap()
{
	_arguments \
		'--help[Show help message and exit]' \
		'--format=dat[Specify the data format to be printed. The default is "summary"]'
		':device:_files -W /dev/input/ -P /dev/input/'
}

(( $+functions[_libinput_analyze] )) || _libinput_analyze()
{
	local curcontext=$curcontext state line ret=1
	local features
	features=(
		"per-slot-delta:analyze relative movement per touch per slot"
	)

	_arguments -C \
		'--help[Print help and exit]' \
		':feature:->feature' \
		'*:: :->option-or-argument'

	case $state in
		(feature)
			_describe -t features 'feature' features
			;;
		(option-or-argument)
			curcontext=${curcontext%:*:*}:libinput-analyze-$words[1]:
			if ! _call_function ret _libinput_analyze_$words[1]; then
				_message "unknown feature: $words[1]"
			fi
			;;
	esac
	return ret
}

(( $+functions[_libinput_record] )) || _libinput_record()
{
	_arguments \
		'--help[Show help message and exit]' \
		'--all[Record all /dev/input/event* devices available on the system]' \
		'--autorestart=[Terminate the current recording after s seconds of device inactivity]' \
		{-o+,--output=}'[Speficy the output file to use]:file:_files -g "*.yml"' \
		'--multiple[Record multiple devices at once]' \
		'--show-keycodes[Show keycodes as-is in the recording]' \
		'--with-libinput[Record libinput events alongside device events]' \
		'*::device:_files -W /dev/input/ -P /dev/input/'
}

(( $+functions[_libinput_replay] )) || _libinput_replay()
{
	_arguments \
		'--help[Show help message and exit]' \
		':recording:_files'
}

_libinput()
{
	local curcontext=$curcontext state line ret=1

	_arguments -C \
		{-h,--help}'[Show help message and exit]' \
		'--version[Show version information and exit]' \
		':command:->command' \
		'*:: :->option-or-argument' && return

	case $state in
		(command)
			_libinput_commands && ret=0
			;;
		(option-or-argument)
			curcontext=${curcontext%:*:*}:libinput-$words[1]:
			if ! _call_function ret _libinput_$words[1]; then
				_message "unknown libinput command: $words[1]"
			fi
			;;
	esac
	return ret
}

_libinput
PK�����{�g\��t���t���(��site-functions/_sd_hosts_or_user_at_hostnu��[�����������#autoload
# SPDX-License-Identifier: LGPL-2.1+

_alternative \
  'users-hosts:: _user_at_host' \
  'hosts:: _hosts'
PK�����{�g\q���(}��(}����site-functions/_nvmenu��[�����������#compdef _nvme nvme

# zsh completions for the nvme command-line interface,
# very loosely based on git and adb command completion
# Kelly Kaoudis kelly.n.kaoudis at intel.com, June 2015

_nvme () {
	local -a _cmds
	_cmds=(
	'id-ctrl:display information about the controller'
	'id-ns:display information about the namespace'
	'list-ns:identify all namespace(s) attached'
	'cmdset-ind-id-ns':display I/O Command Set Independent information about the namespace'
	'id-iocs:display information about I/O command sets'
	'id-domain:display information about domain list'
	'create-ns:create a new namespace before attachment'
	'delete-ns:delete a detached namespace'
	'attach-ns:attach namespace to controller'
	'detach-ns:detach namespace from controller'
	'list-ctrl:identify all controller(s) attached'
	'nvm-id-ctrl:display information about the nvm command set'
	'list-endgrp:display information about nvme endurance group list'
	'get-ns-id:get namespace id of opened block device'
	'get-log:retrieve any log in raw format'
	'predictable-lat-log:retrieve predictable latency per nvmset log'
	'pred-lat-event-agg-log:retrieve predictable latency event aggregate log'
	'persistent-event-log:retrieve presistent event log'
	'fw-log:retrieve fw log'
	'smart-log:retrieve SMART log'
	'smart-log-add:retrieve additional SMART log'
	'error-log:retrieve error log'
	'endurance-event-agg-log:retrieve endurance group event aggregate log'
	'lba-status-log:retrieve lba status log'
	'resv-notif-log: retrieve reservation notification log'
	'get-feature:display a controller feature'
	'set-feature:set a controller feature and show results'
	'format:apply new block format to namespace'
	'fw-activate:activate a firmware on the device'
	'fw-download:download a firmware to the device'
	'admin-passthru:submit a passthrough IOCTL'
	'io-passthru:submit a passthrough IOCTL'
	'security-send:send security/secure data to controller'
	'security-recv:ask for security/secure data from controller'
	'resv-acquire:acquire reservation on a namespace'
	'resv-register:register reservation on a namespace'
	'resv-release:release reservation on a namespace'
	'resv-report:report reservation on a namespace'
	'copy:submit a simple copy command'
	'flush:submit a flush'
	'compare:compare data on device to data elsewhere'
	'read:submit a read command'
	'write:submit a write command'
	'capacity-mgmt: submit capacity management command'
	'show-regs:shows the controller registers; requires admin character device'
	'boot-part-log: retrieve boot partition log'
	'fid-support-effects-log:retrieve fid support and effects log'
	'supported-log-pages: retrieve support log pages details'
	'lockdown:submit a lockdown command'
	'help:print brief descriptions of all nvme commands'
	)

	local expl

	_arguments '*:: :->subcmds' && return 0

	if (( CURRENT == 1 )); then
		_describe -t commands "nvme subcommands" _cmds
		return
	else
		case ${words[CURRENT-1]} in
		(id-ctrl)
			local _idctrl
			_idctrl=(
			/dev/nvme':supply a device to use (required)'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			--human-readable':show infos in readable format'
			-H':alias of --human-readable'
			--vendor-specific':also dump binary vendor infos'
			-v':alias of --vendor-specific'
			)

			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-ctrl options" _idctrl
			;;
		(id-ns)
			local _idns
			_idns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			--human-readable':show infos in readable format'
			-H':alias of --human-readable'
			--vendor-specific':also dump binary vendor infos'
			-v':alias of --vendor-specific'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-ns options" _idns
			;;
		(list-ns)
			local _listns
			_listns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':start namespace infos listing with this nsid'
			-n':alias of --namespace-id'
			--csi=':command set identifier'
			-y':alias of --csi'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-ns options" _listns
			;;
		(cmdset-ind-id-ns)
			local _cmdset_ind_idns
			_cmdset_ind_idns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			--human-readable':show infos in readable format'
			-H':alias of --human-readable'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme cmdset-ind-id-ns options" _cmdset_ind_idns
			;;
		(id-iocs)
			local _idiocs
			_idiocs=(
			/dev/nvme':supply a device to use (required)'
			--controller-id=':show infos for controller <cntid>'
			-c':alias of --controller-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-iocs options" _idiocs
			;;
		(id-domain)
			local _iddomain
			_iddomain=(
			/dev/nvme':supply a device to use (required)'
			--dom-id=':show infos for domain id <cntid>'
			-d':alias of --dom-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-domain options" _iddomain
			;;
		nvm-id-ctrl)
			local _nvmidctrl
			_nvmidctrl=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme nvm-id-ctrl options" _nvmidctrl
			;;
		(list-endgrp)
			local _listendgrp
			_listendgrp=(
			/dev/nvme':supply a device to use (required)'
			--endgrp-id=':endurance group id'
			-i':alias of --endgrp-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-ns options" _listendgrp
			;;
		(create-ns)
			local _createns
			_createns=(
			/dev/nvme':supply a device to use (required)'
			--nsze=':namespace size to create'
			-s':alias of --nsze'
			--ncap=':namespace capacity'
			-c':alias of --ncap'
			--flbas=':FLBA size'
			-f':alias of --flbas'
			--dps=':data protection?'
			-d':alias of --dps'
			--nmic=':multipath and sharing'
			-n':alias of --nmic'
			--csi=':command set identifier'
			-y':alias of --csi'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme create-ns options" _createns
			;;
		(delete-ns)
			local _deletens
			_deletens=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':namespace to delete'
			-n':alias of --namespace-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme delete-ns options" _deletens
			;;
		(attach-ns)
			local _attachns
			_attachns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':namespace to attach to the controller'
			-n':alias of --namespace-id'
			--controllers=':if a device is not provided, supply a comma-sep list of controllers'
			-c':alias of --controllers'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme attach-ns options" _attachns
			;;
		(detach-ns)
			local _detachns
			_detachns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':namespace to detach from controller'
			-n':alias of --namespace-id'
			--controllers=':if a device is not provided, supply a comma-sep list of controllers'
			-c':alias of --controllers'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme detach-ns options" _detachns
			;;
		(list-ctrl)
			local _listctrl
			_listctrl=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show controllers attached to this namespace'
			-n':alias of --namespace-id'
			--cntid=':start the list with this controller'
			-c':alias of --cntid'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-ctrl options" _listctrl
			;;
		(get-ns-id)
			local _getnsid
			_getnsid=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-ns-id options" _getnsid
			;;
		(get-log)
			local _getlog
			_getlog=(
			/dev/nvme':supply a device to use (required)'
			--log-id=':requested log number'
			-i':alias of --log-id'
			--log-len=':number of bytes to show for requested log'
			-l':alias of --log-len'
			--namespace-id=':get log specific to <nsid> if namespace logs are supported'
			-n':alias of --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-log options" _getlog
			;;
		(persistent-event-log)
			local _persistenteventlog
			_persistenteventlog=(
			/dev/nvme':supply a device to use (required)'
			--action=': action the controller shall take for this log page'
			-a':alias to --action'
			--log-len=':number of bytes to show for requested log'
			-l':alias of --log-len'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "persistent-event-log options" _persistenteventlog
			;;
		(pred-lat-event-agg-log)
			local _predlateventagglog
			_predlateventagglog=(
			/dev/nvme':supply a device to use (required)'
			--log-entries=': Number of pending NVM Set Entries log list'
			-e':alias to --log-entries'
			--rae': Retain an Asynchronous Event'
			-r':alias to --rae'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme pred-lat-event-agg-log options" _predlateventagglog
			;;
		(predictable-lat-log)
			local _predictablelatlog
			_predictablelatlog=(
			/dev/nvme':supply a device to use (required)'
			--nvmset-id=': NVM Set Identifier on which log page retrieve info'
			-i':alias to --nvmset-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme predictable-lat-log options" _predictablelatlog
			;;
		(fw-log)
			local _fwlog
			_fwlog=(
			/dev/nvme':supply a device to use (required)'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fw-log options" _fwlog
			;;
		(smart-log)
			local _smartlog
			_smartlog=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':get SMART log specific to <nsid> if namespace logs are supported'
			-n':alias to --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme smart-log options" _smartlog
			;;
		(smart-log-add)
			local _add
			_add=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':get additional SMART log specific to <nsid> if namespace logs supported'
			-n':alias to --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme smart-log-add options" _add
			;;
		(error-log)
			local _errlog
			_errlog=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':get log specific to <nsid> if namespace logs are supported'
			-n':alias to --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			--log-entries=':request n >= 1 log entries'
			-e':alias to --log-entries'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme error-log options" _errlog
			;;
		(endurance-event-agg-log)
			local _enduranceeventagglog
			_enduranceeventagglog=(
			/dev/nvme':supply a device to use (required)'
			--log-entries=': Number of Endurance Group Event Agg Entries log list'
			-e':alias to --log-entries'
			--rae': Retain an Asynchronous Event'
			-r':alias to --rae'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme endurance-event-agg-log options" _enduranceeventagglog
			;;
		(lba-status-log)
			local _lbastatuslog
			_lbastatuslog=(
			/dev/nvme':supply a device to use (required)'
			--rae': Retain an Asynchronous Event'
			-r':alias to --rae'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme lba-status-log options" _lbastatuslog
			;;
		(resv-notif-log)
			local _resvnotiflog
			_resvnotiflog=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-notif-log options" _resvnotiflog
			;;
		(boot-part-log)
			local _bootpartlog
			_bootpartlog=(
			/dev/nvme':supply a device to use (required)'
			--lsp=': log specific field'
			-s':alias to --lsp'
			--output-file=': boot partition data output write'
			-f':alias for --output-file'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme boot-part-log options" _bootpartlog
			;;
		(get-feature)
			local _getf
			_getf=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':get feature specific to <nsid>'
			-n':alias to --namespace-id'
			--feature-id=':hexadecimal name of feature to examine (required)'
			-f':alias to --feature-id'
			--sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported'
			-s':alias to --sel'
			--data-len=':buffer len for returned LBA Type Range or host identifier data'
			-l':alias for --data-len'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			--cdw11=':dword 11 value, used for interrupt vector configuration only'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-feature options" _getf
			;;
		(lockdown)
			local _lockdown
			_lockdown=(
			/dev/nvme':supply a device to use (required)'
			--ofi=': Opcode or Feature Identifier(OFI) (required)'
			-o':alias of --ofi'
			--ifc=':Interface (INF) field Information (required)'
			-f':alias of --ifc'
			--prhbt=':Prohibit(PRHBT) bit field (required)'
			-p':alias of --prhbt'
			--scp=':Scope(SCP) field for identifying opcode or feature id (required)'
			-s':alias of --scp'
			--uuid=':UUID Index field required aligned with Scope'
			-U':alias of --uuid'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme lockdown options" _lockdown
			;;
		(set-feature)
			local _setf
			_setf=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':feature is specific to <nsid>'
			-n':alias to --namespace-id'
			--feature-id=':hexadecimal name of feature to set (required)'
			-f':alias to --feature-id'
			--data-len=':buffer length, only used for LBA Type Range or host identifier data'
			-l':alias for --data-len'
			--data=':data file for LBA Type Range or host identifier buffer (defaults to stdin)'
			-d':alias to --data'
			--value=':new value of feature (required)'
			-v'alias to --value'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme set-feature options" _setf
			;;
		(format)
			local _format
			_format=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':<nsid> of namespace to format (required)'
			-n':alias of --namespace-id'
			--lbaf=':LBA format to apply to namespace (required)'
			-l':alias of --lbaf'
			--ses=':secure erase? 0 - no-op (default), 1 - user-data erase, 2 - cryptographic erase'
			-s':alias of --ses'
			--pil=':location of protection information? 0 - end, 1 - start'
			-p':alias of --pil'
			--pi=':protection information? 0 - off, 1 - Type 1 on, 2 - Type 2 on, 3 - Type 3 on'
			-i':alias of --pi'
			--ms=':extended format? 0 - off (metadata in separate buffer), 1 - on (extended LBA used)'
			-m':alias of --ms'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme format options" _format
			;;
		(fw-activate)
			local _fwact
			_fwact=(
			/dev/nvme':supply a device to use (required)'
			--action=':activation action (required)? 0 - replace fw without activating, 1 - replace with activation, 2 - replace with activation at next reset'
			-a':alias of --action'
			--slot=':firmware slot to activate'
			-s':alias of --slot'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fw-activate options" _fwact
			;;
		(fw-download)
			local _fwd
			_fwd=(
			/dev/nvme':supply a device to use (required)'
			--fw=':firmware file to download (required)'
			-f':alias of --fw'
			--xfer=':limit on chunk-size of transfer (if device has download size limit)'
			-x':alias of --xfer'
			--offset=':starting offset, in dwords (defaults to 0, only useful if download is split across multiple files)'
			-o':alias of --offset'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fw-download options" _fwd
			;;
		(capacity-mgmt)
			local _fwd
			_fwd=(
			/dev/nvme':supply a device to use (required)'
			--operation=':Operation to be performed by the controller'
			-o':alias of --operation'
			--element-id=':specific to the value of the Operation field'
			-i':alias of --element-id'
			--cap-lower=':Least significant 32 bits of the capacity in bytes'
			-l':alias of --cap-lower'
			--cap-upper=':Most significant 32 bits of the capacity in bytes'
			-u':alias of --cap-upper'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme capacity-mgmt options" _fwd
			;;
		(supported-log-pages)
			local _support
			_support=(
			/dev/nvme':supply a device to use (required)'
			--human-readable':show infos in readable format'
			-H':alias of --human-readable'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme supported-log-pages options" _support
			;;
		(admin-passthru)
			local _admin
			_admin=(
			/dev/nvme':supply a device to use (required)'
			--opcode=':hexadecimal opcode to send (required)'
			-o':alias of --opcode'
			--flags=':command flags'
			-f':alias of --flags'
			--rsvd=':value for reserved field'
			-R':alias of --rsvd'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--metadata-len=':length for metadata buffer'
			-m':alias of --metadata-len'
			--timeout=':value for timeout'
			-t':alias of --timeout'
			--cdw2=':value for command dword 2'
			-2':alias for --cdw2'
			--cdw3=':value for command dword 3'
			-3':alias for --cdw3'
			--cdw10=':value for command dword 10'
			-4':alias for --cdw10'
			--cdw11=':value for command dword 11'
			-5':alias for --cdw11'
			--cdw12=':value for command dword 12'
			-6':alias for --cdw12'
			--cdw13=':value for command dword 13'
			-7':alias for --cdw13'
			--cdw14=':value for command dword 14'
			-8':alias for command dword 14'
			--cdw15=':value for command dword 15'
			-9':alias for command dword 15'
			--input-file=':defaults to stdin; input for write (send direction)'
			-i':alias for --input-file'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			--show-command':simply print command instead of sending it to <device>'
			-s':alias for --show-command'
			--dry-run':alias for --show-command'
			-d':alias for --show-command'
			--read':set dataflow direction to receive'
			-r':alias for --read'
			--write':set dataflow direction to send'
			-w':alias for --write'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme admin-passthru options" _admin
			;;
		(io-passthru)
			local _io
			_io=(
			/dev/nvme':supply a device to use (required)'
			--opcode=':hexadecimal opcode to send (required)'
			-o':alias of --opcode'
			--flags=':command flags'
			-f':alias of --flags'
			--rsvd=':value for reserved field'
			-R':alias of --rsvd'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--metadata-len=':length for metadata buffer'
			-m':alias of --metadata-len'
			--timeout=':value for timeout'
			-t':alias of --timeout'
			--cdw2=':value for command dword 2'
			-2':alias for --cdw2'
			--cdw3=':value for command dword 3'
			-3':alias for --cdw3'
			--cdw10=':value for command dword 10'
			-4':alias for --cdw10'
			--cdw11=':value for command dword 11'
			-5':alias for --cdw11'
			--cdw12=':value for command dword 12'
			-6':alias for --cdw12'
			--cdw13=':value for command dword 13'
			-7':alias for --cdw13'
			--cdw14=':value for command dword 14'
			-8':alias for command dword 14'
			--cdw15=':value for command dword 15'
			-9':alias for command dword 15'
			--input-file=':defaults to stdin; input for write (send direction)'
			-i':alias for --input-file'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			--show-command':simply print command instead of sending it to <device>'
			-s':alias for --show-command'
			--dry-run':alias for --show-command'
			-d':alias for --show-command'
			--read':set dataflow direction to receive'
			-r':alias for --read'
			--write':set dataflow direction to send'
			-w':alias for --write'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme io-passthru options" _io
			;;
		(security-send)
			local _ssend
			_ssend=(
			/dev/nvme':supply a device to use (required)'
			--file=':payload'
			-f':alias for --file'
			--secp=':security protocol as defined in SPC-4'
			-p':alias for --secp'
			--spsp=':send security-protocol-specific data as defined in SPC-4'
			-s':alias for --spsp'
			--tl=':transfer length as defined in SPC-4'
			-t':alias for --tl'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme security-send options" _ssend
			;;
		(security-recv)
			local _srecv
			_srecv=(
			/dev/nvme':supply a device to use (required)'
			--secp=':security protocol as defined in SPC-4'
			-p':alias for --secp'
			--spsp=':send security-protocol-specific data as defined in SPC-4'
			-s':alias for --spsp'
			--size=':size of buffer (prints to stdout on successful recv)'
			-x':alias for --size'
			--al=':allocation length as defined in SPC-4'
			-a':alias for --al'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme security-recv options" _srecv
			;;
		(resv-acquire)
			local _acq
			_acq=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':<nsid> of namespace to try to reserve (required)'
			-n':alias for --namespace-id'
			--prkey=':pre-empt reservation key'
			-p':alias for --prkey'
			--rtype=':hexadecimal reservation type'
			-t':alias for --rtype'
			--racqa=':reservation acquire action'
			-a':alias for --racqa'
			--iekey=':ignore existing reservation key'
			-i':alias for --iekey'
			--crkey':current reservation key'
			-c':alias for --crkey'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-acquire options" _acq
			;;
		(resv-release)
			local _rel
			_rel=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			--rtype=':hexadecimal reservation type'
			-t':alias of --rtype'
			--rrela=':reservation release action'
			-a':alias of --rrela'
			--iekey':ignore existing reservation key'
			-i':alias of --iekey'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-release options" _rel
			;;
		(resv-report)
			local _rep
			_rep=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			--numd=':number of dwords of reservation status to xfer'
			-d':alias of --numd'
			--raw-binary':dump output in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-report options" _rep
			;;
		(resv-register)
			local _reg
			_reg=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			--crkey=':current reservation key'
			-c'alias of --crkey'
			--nrkey=':new reservation key'
			-k':alias of --nrkey'
			--cptpl=':change persistence through power loss setting'
			-p':alias for --cptpl'
			--rrega=':reservation registration action to perform'
			-r':alias for --rrega'
			--iekey':ignore existing reservation key'
			-i':alias for --iekey'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-register options" _reg
			;;
		(copy)
			local _copy
			_copy=(
			/dev/nvme':supply a device to use (required)'
			--sdlba=':64-bit addr of first destination logical block'
			-d':alias of --sdlba'
			--slbs=':64-bit addr of first block per range (comma-separated list)'
			-s':alias of --slbs'
			--blocks=':number of blocks per range (comma-separated list, zeroes-based values)'
			-b':alias of --blocks'
			--limited-retry':if included, controller should try less hard to retrieve data from media (if not included, all available data recovery means used)'
			-l':alias of --limited-retry'
			--force-unit-access':if included, the data shall be read from non-volatile media'
			-f':alias of --force-unit access'
			--prinfow=':protection information and check field (write part)'
			-p':alias of --prinfow'
			--prinfor=':protection information and check field (read part)'
			-P':alias of --prinfor'
			--ref-tag=':initial lba reference tag (write part)'
			-r':alias of --ref-tag'
			--expected-ref-tags=':expected lba reference tags (read part, comma-separated list)'
			-R':alias of --expected-ref-tags'
			--app-tag=':lba application tag (write part)'
			-a':alias of --app-tag'
			--expected-app-tags=':expected lba application tags (read part, comma-separated list)'
			-A':alias of --expected-app-tags'
			--app-tag-mask=':lba application tag mask (write part)'
			-m':alias of --app-tag-mask'
			--expected-app-tag-masks=':expected lba application tag masks (read part, comma-separated list)'
			-M':alias of --expected-app-tag-masks'
			--dir-type':directive type (write part)'
			-T':alias of --dir-type'
			--dir-spec':directive specific (write part)'
			-S':alias of --dir-spec'
			--format':source range entry format'
			-F':alias of --format'
			)
			_arguments '*:: :->subcmds'
                       _describe -t commands "nvme copy options" _copy
		       ;;
		(flush)
			local _flush
			_flush=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme flush options" _flush
			;;
		(compare)
			local _comp
			_comp=(
			/dev/nvme':supply a device to use (required)'
			--start-block=':begin compare at this 64-bit LBA on device'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to compare to local data'
			-c':alias of --block-count'
			--metadata-size=':number of bytes of metadata to compare'
			-y':alias of --metadata-size'
			--data-size=':size of local data buffer in bytes'
			-z':alias of --data-size'
			--data=':local data file to compare to blocks on device'
			-d':alias of --data'
			--prinfo=':protection information action and check field'
			-p':alias of --prinfo'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--limited-retry':if included, controller should try less hard to retrieve data from media (if not included, all available data recovery means used)'
			-l':alias of --limited-retry'
			--force-unit-access':if included, the data shall be read from non-volatile media'
			-f':alias of --force-unit access'
			--show-command':show command instead of sending to device'
			-v':alias of --show-command'
			--dry-run':show command instead of sending to device'
			-w':alias of --show-command'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme compare options" _comp
			;;
		(read)
			local _read
			_read=(
			/dev/nvme':supply a device to use (required)'
			--start-block=':64-bit address of the first logical block to be read'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to read'
			-c':alias of --block-count'
			--data-size=':size of data to be read'
			-z':alias of --data-size'
			--metadata-size=':size of metadata to be read'
			-y':alias of --metadata-size'
			--ref-tag=':reference tag (for end to end PI)'
			-r':alias of --ref-tag'
			--data=':file into which data should be read (defaults to stdout)'
			-d':alias of --data'
			--prinfo=':protection information and check field'
			-p':alias of --prinfo'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--limited-retry=':if included, controller should try less hard to retrieve data from media (if not included, all available data-recovery means used)'
			-l':alias of --limited-retry'
			--latency':latency statistics will be output following read'
			-t':alias of --latency'
			--force-unit-access':data read shall be returned from nonvolatile media before command completion is indicated'
			-f':alias of --force-unit-access'
			--show-command':show command instead of sending to device'
			-v':alias of --show-command'
			--dry-run':show command instead of sending to device'
			-w':alias of --show-command'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme read options" _read
			;;
		(write)
			local _wr
			_wr=(
			/dev/nvme':supply a device to use (required)'
			--start-block=':64-bit address of the first logical block to be written'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to write'
			-c':alias of --block-count'
			--data-size=':size of data to be written'
			-z':alias of --data-size'
			--metadata-size=':size of metadata to be written'
			-y':alias of --metadata-size'
			--ref-tag=':reference tag (for end to end PI)'
			-r':alias of --ref-tag'
			--data=':file from which data should be written to device (defaults to stdin)'
			-d':alias of --data'
			--prinfo=':protection information and check field'
			-p':alias of --prinfo'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--limited-retry=':if included, controller should try less hard to send data to media (if not included, all available data-recovery means used)'
			-l':alias of --limited-retry'
			--latency':latency statistics will be output following write'
			-t':alias of --latency'
			--force-unit-access':data shall be written to nonvolatile media before command completion is indicated'
			-f':alias of --force-unit-access'
			--show-command':show command instead of sending to device'
			-v':alias of --show-command'
			--dry-run':show command instead of sending to device'
			-w':alias of --show-command'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme write options" _wr
			;;
		(show-regs)
			local _shor
			_shor=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme show-regs options" _shor
			;;
		(fid-support-effects-log)
			local _fidsupporteffectslog
			_fidsupporteffectslog=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fid-support-effects-log options" _fidsupporteffectslog
			;;
		(help)
			local _h
			_h=( id-ctrl id-ns list-ns id-iocs create-ns delete-ns attach-ns detach-ns
			     list-ctrl get-ns-id get-log fw-log smart-log error-log get-feature
			     set-feature format fw-activate fw-download admin-passthru io-passthru
			     security-send security-recv resv-acquire resv-register resv-release
			     resv-report flush compare read write copy show-regs persistent-event-log
				 pred-lat-event-agg-log nvm-id-ctrl endurance-event-agg-log lba-status-log
				 resv-notif-log capacity-mgmt id-domain boot-part-log fid-support-effects-log
				 supported-log-pages lockdown
				 supported-log-pages list-endgrp
			   )
			_arguments '*:: :->subcmds'
			_describe -t commands "help: infos on a specific nvme command, or provide no option to see a synopsis of all nvme commands" _h
			;;
		(*)
			_files
			;;
		esac
		return
	fi

	_files
}
PK�����{�g\S�g�t4��t4����site-functions/_curlnu��[�����������#compdef curl

# curl zsh completion

local curcontext="$curcontext" state state_descr line
typeset -A opt_args

local rc=1

_arguments -C -S \
  --happy-eyeballs-timeout-ms'[How long to wait in milliseconds for IPv6 before trying IPv4]':'<milliseconds>' \
  --aws-sigv4'[Use AWS V4 signature authentication]':'<provider1[:provider2[:region[:service]]]>' \
  {-c,--cookie-jar}'[Write cookies to <filename> after operation]':'<filename>':_files \
  {-D,--dump-header}'[Write the received headers to <filename>]':'<filename>':_files \
  {-y,--speed-time}'[Trigger '\''speed-limit'\'' abort after this time]':'<seconds>' \
  --proxy-cacert'[CA certificate to verify peer against for proxy]':'<file>':_files \
  --tls13-ciphers'[of TLS 1.3 ciphersuites> TLS 1.3 cipher suites to use]':'<list' \
  {-E,--cert}'[Client certificate file and password]':'<certificate[:password]>' \
  --libcurl'[Dump libcurl equivalent code of this command line]':'<file>':_files \
  --proxy-capath'[CA directory to verify peer against for proxy]':'<dir>':_files \
  --proxy-negotiate'[HTTP Negotiate (SPNEGO) authentication on the proxy]':'Use' \
  --proxy-pinnedpubkey'[FILE/HASHES public key to verify proxy with]':'<hashes>' \
  --crlfile'[Get a CRL list in PEM format from the given file]':'<file>':_files \
  --proxy-insecure'[HTTPS proxy connections without verifying the proxy]':'Do' \
  --proxy-ssl-allow-beast'[security flaw for interop for HTTPS proxy]':'Allow' \
  --abstract-unix-socket'[Connect via abstract Unix domain socket]':'<path>' \
  --pinnedpubkey'[FILE/HASHES Public key to verify peer against]':'<hashes>' \
  --proxy-pass'[Pass phrase for the private key for HTTPS proxy]':'<phrase>' \
  {-p,--proxytunnel}'[Operate through an HTTP proxy tunnel (using CONNECT)]' \
  --socks5-hostname'[SOCKS5 proxy, pass host name to proxy]':'<host[:port]>' \
  --proto-default'[Use PROTOCOL for any URL missing a scheme]':'<protocol>' \
  --proxy-tls13-ciphers'[list> TLS 1.3 proxy cipher suites]':'<ciphersuite' \
  --socks5-gssapi-service'[SOCKS5 proxy service name for GSS-API]':'<name>' \
  --ftp-alternative-to-user'[String to replace USER \[name\]]':'<command>' \
  --ftp-ssl-control'[SSL/TLS for FTP login, clear for transfer]':'Require' \
  {-T,--upload-file}'[Transfer local FILE to destination]':'<file>':_files \
  --local-port'[Force use of RANGE for local port numbers]':'<num/range>' \
  --proxy-tlsauthtype'[TLS authentication type for HTTPS proxy]':'<type>' \
  {-R,--remote-time}'[Set the remote file'\''s time on the local output]' \
  --retry-connrefused'[on connection refused (use with --retry)]':'Retry' \
  --suppress-connect-headers'[proxy CONNECT response headers]':'Suppress' \
  {-j,--junk-session-cookies}'[session cookies read from file]':'Ignore' \
  --location-trusted'[--location, and send auth to other hosts]':'Like' \
  --proxy-cert-type'[Client certificate type for HTTPS proxy]':'<type>' \
  {-O,--remote-name}'[Write output to a file named as the remote file]' \
  --trace-ascii'[Like --trace, but without hex output]':'<file>':_files \
  --connect-timeout'[Maximum time allowed for connection]':'<seconds>' \
  --expect100-timeout'[How long to wait for 100-continue]':'<seconds>' \
  {-g,--globoff}'[Disable URL sequences and ranges using {} and \[\]]' \
  {-m,--max-time}'[Maximum time allowed for the transfer]':'<seconds>' \
  --dns-ipv4-addr'[IPv4 address to use for DNS requests]':'<address>' \
  --dns-ipv6-addr'[IPv6 address to use for DNS requests]':'<address>' \
  --ignore-content-length'[the size of the remote resource]':'Ignore' \
  {-k,--insecure}'[Allow insecure server connections when using SSL]' \
  --mail-auth'[Originator address of the original email]':'<address>' \
  --noproxy'[List of hosts which do not use proxy]':'<no-proxy-list>' \
  --proto-redir'[Enable/disable PROTOCOLS on redirect]':'<protocols>' \
  --dns-interface'[Interface to use for DNS requests]':'<interface>' \
  --hostpubmd5'[Acceptable MD5 hash of the host public key]':'<md5>' \
  --keepalive-time'[Interval time for keepalive probes]':'<seconds>' \
  --proxy-cert'[Set client certificate for proxy]':'<cert[:passwd]>' \
  --random-file'[File for reading random data from]':'<file>':_files \
  --socks5-basic'[Enable username/password auth for SOCKS5 proxies]' \
  --cacert'[CA certificate to verify peer against]':'<file>':_files \
  {-H,--header}'[Pass custom header(s) to server]':'<header/@file>' \
  {-i,--include}'[Include protocol response headers in the output]' \
  --proxy-header'[Pass custom header(s) to proxy]':'<header/@file>' \
  --unix-socket'[Connect through this Unix domain socket]':'<path>' \
  {-w,--write-out}'[Use output FORMAT after completion]':'<format>' \
  --http2-prior-knowledge'[HTTP 2 without HTTP/1.1 Upgrade]':'Use' \
  {-o,--output}'[Write to file instead of stdout]':'<file>':_files \
  {-J,--remote-header-name}'[the header-provided filename]':'Use' \
  --socks4a'[SOCKS4a proxy on given host + port]':'<host[:port]>' \
  {-Y,--speed-limit}'[Stop transfers slower than this]':'<speed>' \
  {-z,--time-cond}'[Transfer based on a time condition]':'<time>' \
  --capath'[CA directory to verify peer against]':'<dir>':_files \
  {-f,--fail}'[Fail silently (no output at all) on HTTP errors]' \
  --proxy-tlspassword'[TLS password for HTTPS proxy]':'<string>' \
  {-U,--proxy-user}'[Proxy user and password]':'<user:password>' \
  --proxy1.0'[Use HTTP/1.0 proxy on given port]':'<host[:port]>' \
  {-r,--range}'[Retrieve only the bytes within RANGE]':'<range>' \
  {-A,--user-agent}'[Send User-Agent <name> to server]':'<name>' \
  --egd-file'[EGD socket path for random data]':'<file>':_files \
  --fail-early'[Fail on first transfer error, do not continue]' \
  --haproxy-protocol'[HAProxy PROXY protocol v1 header]':'Send' \
  --preproxy'[Use this proxy first]':'[protocol://]host[:port]' \
  --retry-max-time'[Retry only within this period]':'<seconds>' \
  --socks4'[SOCKS4 proxy on given host + port]':'<host[:port]>' \
  --socks5'[SOCKS5 proxy on given host + port]':'<host[:port]>' \
  --socks5-gssapi-nec'[with NEC SOCKS5 server]':'Compatibility' \
  --ssl-allow-beast'[security flaw to improve interop]':'Allow' \
  --cert-status'[Verify the status of the server certificate]' \
  --ftp-create-dirs'[the remote dirs if not present]':'Create' \
  {-:,--next}'[Make next URL use its separate set of options]' \
  --proxy-key-type'[Private key file type for proxy]':'<type>' \
  --remote-name-all'[the remote file name for all URLs]':'Use' \
  {-X,--request}'[Specify request command to use]':'<command>' \
  --retry'[Retry request if transient problems occur]':'<num>' \
  --ssl-no-revoke'[cert revocation checks (WinSSL)]':'Disable' \
  --cert-type'[Certificate file type (DER/PEM/ENG)]':'<type>' \
  --connect-to'[Connect to host]':'<HOST1:PORT1:HOST2:PORT2>' \
  --create-dirs'[Create necessary local directory hierarchy]' \
  --max-redirs'[Maximum number of redirects allowed]':'<num>' \
  {-n,--netrc}'[Must read .netrc for user name and password]' \
  --proxy-crlfile'[Set a CRL list for proxy]':'<file>':_files \
  --sasl-ir'[Enable initial response in SASL authentication]' \
  --socks5-gssapi'[GSS-API auth for SOCKS5 proxies]':'Enable' \
  --interface'[Use network INTERFACE (or address)]':'<name>' \
  --key-type'[Private key file type (DER/PEM/ENG)]':'<type>' \
  --netrc-file'[Specify FILE for netrc]':'<filename>':_files \
  {-N,--no-buffer}'[Disable buffering of the output stream]' \
  --proxy-service-name'[SPNEGO proxy service name]':'<name>' \
  --styled-output'[styled output for HTTP headers]':'Enable' \
  --max-filesize'[Maximum file size to download]':'<bytes>' \
  --negotiate'[Use HTTP Negotiate (SPNEGO) authentication]' \
  --no-keepalive'[Disable TCP keepalive on the connection]' \
  {-#,--progress-bar}'[Display transfer progress as a bar]' \
  {-x,--proxy}'[Use this proxy]':'[protocol://]host[:port]' \
  --proxy-anyauth'[any proxy authentication method]':'Pick' \
  {-Q,--quote}'[Send command(s) to server before transfer]' \
  --request-target'[the target for this request]':'Specify' \
  {-u,--user}'[Server user and password]':'<user:password>' \
  {-K,--config}'[Read config from a file]':'<file>':_files \
  {-C,--continue-at}'[Resumed transfer offset]':'<offset>' \
  --data-raw'[HTTP POST data, '\''@'\'' allowed]':'<data>' \
  --disallow-username-in-url'[username in url]':'Disallow' \
  --krb'[Enable Kerberos with security <level>]':'<level>' \
  --proxy-ciphers'[SSL ciphers to use for proxy]':'<list>' \
  --proxy-digest'[Use Digest authentication on the proxy]' \
  --proxy-tlsuser'[TLS username for HTTPS proxy]':'<name>' \
  {-b,--cookie}'[Send cookies from string/file]':'<data>' \
  --data-urlencode'[HTTP POST data url encoded]':'<data>' \
  --delegation'[GSS-API delegation permission]':'<LEVEL>' \
  {-P,--ftp-port}'[Use PORT instead of PASV]':'<address>' \
  --post301'[Do not switch to GET after following a 301]' \
  --post302'[Do not switch to GET after following a 302]' \
  --post303'[Do not switch to GET after following a 303]' \
  --trace-time'[Add time stamps to trace/verbose output]' \
  --dns-servers'[DNS server addrs to use]':'<addresses>' \
  {-G,--get}'[Put the post data in the URL and use GET]' \
  --limit-rate'[Limit transfer speed to RATE]':'<speed>' \
  --ntlm-wb'[Use HTTP NTLM authentication with winbind]' \
  --path-as-is'[Do not squash .. sequences in URL path]' \
  --proxy-basic'[Use Basic authentication on the proxy]' \
  --retry-delay'[Wait time between retries]':'<seconds>' \
  --trace'[Write a debug trace to FILE]':'<file>':_files \
  {-a,--append}'[Append to target file when uploading]' \
  --ftp-ssl-ccc-mode'[Set CCC mode]':'<active/passive>' \
  --metalink'[Process given URLs as metalink XML file]' \
  --tr-encoding'[Request compressed transfer encoding]' \
  --xattr'[Store metadata in extended file attributes]' \
  --ftp-skip-pasv-ip'[the IP address for PASV]':'Skip' \
  --pass'[Pass phrase for the private key]':'<phrase>' \
  --proxy-ntlm'[Use NTLM authentication on the proxy]' \
  {-S,--show-error}'[Show error even when -s is used]' \
  --ciphers'[of ciphers> SSL ciphers to use]':'<list' \
  --form-string'[Specify multipart MIME data]':'<name=string>' \
  --login-options'[Server login options]':'<options>' \
  --tftp-blksize'[Set TFTP BLKSIZE option]':'<value>' \
  --tftp-no-options'[not send any TFTP options]':'Do' \
  {-v,--verbose}'[Make the operation more talkative]' \
  --proxy-key'[Private key for HTTPS proxy]':'<key>' \
  {-F,--form}'[Specify multipart MIME data]':'<name=content>' \
  --mail-from'[Mail from this address]':'<address>' \
  --oauth2-bearer'[OAuth 2 Bearer Token]':'<token>' \
  --proto'[Enable/disable PROTOCOLS]':'<protocols>' \
  --tlsauthtype'[TLS authentication type]':'<type>' \
  --no-sessionid'[Disable SSL session-ID reusing]' \
  --data-binary'[HTTP POST binary data]':'<data>' \
  --mail-rcpt'[Mail to this address]':'<address>' \
  {-t,--telnet-option}'[Set telnet option]':'<opt=val>' \
  --tls-max'[Use TLSv1.0 or greater]':'<VERSION>' \
  --ftp-ssl-ccc'[Send CCC after authenticating]' \
  {-4,--ipv4}'[Resolve names to IPv4 addresses]' \
  {-6,--ipv6}'[Resolve names to IPv6 addresses]' \
  --netrc-optional'[either .netrc or URL]':'Use' \
  --service-name'[SPNEGO service name]':'<name>' \
  {-V,--version}'[Show version number and quit]' \
  --data-ascii'[HTTP POST ASCII data]':'<data>' \
  --ftp-account'[Account data string]':'<data>' \
  --compressed-ssh'[SSH compression]':'Enable' \
  --disable-eprt'[Inhibit using EPRT or LPRT]' \
  --ftp-method'[Control CWD usage]':'<method>' \
  --pubkey'[SSH Public key file name]':'<key>' \
  --raw'[Do HTTP "raw"; no transfer decoding]' \
  --anyauth'[Pick any authentication method]' \
  --compressed'[Request compressed response]' \
  --ftp-pasv'[Use PASV/EPSV instead of PORT]' \
  --no-alpn'[Disable the ALPN TLS extension]' \
  --tcp-nodelay'[Use the TCP_NODELAY option]' \
  {-B,--use-ascii}'[Use ASCII/text transfer]' \
  --digest'[Use HTTP Digest Authentication]' \
  --proxy-tlsv1'[Use TLSv1 for HTTPS proxy]' \
  --engine'[Crypto engine to use]':'<name>' \
  --no-npn'[Disable the NPN TLS extension]' \
  --basic'[Use HTTP Basic Authentication]' \
  {-M,--manual}'[Display the full manual]' \
  --false-start'[Enable TLS False Start]' \
  --crlf'[Convert LF to CRLF in upload]' \
  {-d,--data}'[HTTP POST data]':'<data>' \
  {-I,--head}'[Show document info only]' \
  --key'[Private key file name]':'<key>' \
  --ntlm'[Use HTTP NTLM authentication]' \
  {-e,--referer}'[Referrer URL]':'<URL>' \
  {-1,--tlsv1}'[Use TLSv1.0 or greater]' \
  --disable-epsv'[Inhibit using EPSV]' \
  --stderr'[Where to redirect stderr]' \
  --ftp-pret'[Send PRET before PASV]' \
  {-L,--location}'[Follow redirects]' \
  --tcp-fastopen'[Use TCP Fast Open]' \
  --tlsuser'[TLS user name]':'<name>' \
  {-l,--list-only}'[List only mode]' \
  {-q,--disable}'[Disable .curlrc]' \
  --url'[URL to work with]':'<url>' \
  {-0,--http1.0}'[Use HTTP 1.0]' \
  {-h,--help}'[This help text]' \
  --ssl-reqd'[Require SSL/TLS]' \
  --tlspassword'[TLS password]' \
  {-s,--silent}'[Silent mode]' \
  --http1.1'[Use HTTP 1.1]' \
  {-2,--sslv2}'[Use SSLv2]' \
  {-3,--sslv3}'[Use SSLv3]' \
  --tlsv1.0'[Use TLSv1.0]' \
  --tlsv1.1'[Use TLSv1.1]' \
  --tlsv1.2'[Use TLSv1.2]' \
  --tlsv1.3'[Use TLSv1.3]' \
  --http2'[Use HTTP 2]' \
  --ssl'[Try SSL/TLS]' \
  '*:URL:_urls' && rc=0

return rc
PK�����|�g\�ZHM��M����site-functions/_bootctlnu��[�����������#compdef bootctl
# SPDX-License-Identifier: LGPL-2.1+

(( $+functions[_bootctl_command] )) || _bootctl_command()
{
    local -a _bootctl_cmds
    _bootctl_cmds=(
        "status:Show status of installed systemd-boot and EFI variables"
        "install:Install systemd-boot to the ESP and EFI variables"
        "update:Update systemd-boot in the ESP and EFI variables"
        "remove:Remove systemd-boot from the ESP and EFI variables"
    )
    if (( CURRENT == 1 )); then
        _describe -t commands 'bootctl command' _bootctl_cmds || compadd "$@"
    else
        local curcontext="$curcontext"
        cmd="${${_bootctl_cmds[(r)$words[1]:*]%%:*}}"
        if (( $+functions[_bootctl_$cmd] )); then
            _bootctl_$cmd
        else
            _message "no more options"
        fi
    fi
}

_arguments \
    {-h,--help}'[Prints a short help text and exits.]' \
    '--version[Prints a short version string and exits.]' \
    '--path=[Path to the EFI System Partition (ESP)]:path:_directories' \
    '--no-variables[Do not touch EFI variables]' \
    '*::bootctl command:_bootctl_command'
PK�����|�g\!�y�z��z����vendor-completions/_etckeepernu��[�����������#compdef etckeeper

local _VCS=$(sed -n "s,^VCS=\([\"']\?\)\(.*\)\1$,\2,p" \
    ${ETCKEEPER_CONF_DIR:-/etc/etckeeper}/etckeeper.conf 2>/dev/null)

_arguments '--help[show this help message and exit]' \
    '--version[show version information]' \
    ":etckeeper command:(/etc/etckeeper/*.d(/:t:r))" \
    '*::subcmd:->subcmd' && return 0

case "$words[1]" in
(commit)
    _arguments ':message text: '
    ;;
(update-ignore)
    _arguments '-a[add a "managed by etckeeper" block]'
    ;;
(uninit)
    _arguments '-f[force uninit without prompting]'
    ;;
(vcs)
    [[ $_VCS == git ]] && service=git
    _$_VCS
    ;;
(*)
    ;;
esac
PK�������t�g\��qluJ��uJ������������������site-functions/_firewalldnu��[�����������PK�������u�g\ا�	��	���������������J��site-functions/_systemd-resolvenu��[�����������PK�������u�g\��m������������������'T��site-functions/_hostnamectlnu��[�����������PK�������u�g\D+~�������������������P]��site-functions/_busctlnu��[�����������PK�������u�g\Y��x���x����������������i��site-functions/_parallelnu��[�����������PK�������v�g\�&J�<���<��������������Gj��site-functions/_systemctlnu��[�����������PK�������v�g\�t���������������������site-functions/_localectlnu��[�����������PK�������v�g\�5t��������������������е��site-functions/_sd_unit_filesnu��[�����������PK�������w�g\ڿ�+!��!�����������������site-functions/_sd_outputmodesnu��[�����������PK�������w�g\�M��4��4������������������site-functions/_systemd-deltanu��[�����������PK�������w�g\NJ8j@��@�����������������site-functions/_systemd-runnu��[�����������PK�������x�g\B�V�.��.������������������site-functions/_coredumpctlnu��[�����������PK�������x�g\K�g%��%�����������������site-functions/_systemd-inhibitnu��[�����������PK�������x�g\�v�����������������������site-functions/_systemd-analyzenu��[�����������PK�������x�g\��s?c��c������������������site-functions/_sd_machinesnu��[�����������PK�������y�g\�Wt������������������z���site-functions/_timedatectlnu��[�����������PK�������y�g\
#Ƽ������ ����������������site-functions/_systemd-tmpfilesnu��[�����������PK�������y�g\�Em��m������������������site-functions/_udevadmnu��[�����������PK�������y�g\�dU4��������������������site-functions/_kernel-installnu��[�����������PK�������z�g\�W4������������������|�site-functions/_systemdnu��[�����������PK�������z�g\�\����������������������site-functions/_loginctlnu��[�����������PK�������z�g\:�i�W��W���������������,�site-functions/_journalctlnu��[�����������PK�������{�g\PΪ������������������WD�site-functions/_libinputnu��[�����������PK�������{�g\��t���t���(�������������b�site-functions/_sd_hosts_or_user_at_hostnu��[�����������PK�������{�g\q���(}��(}��������������[c�site-functions/_nvmenu��[�����������PK�������{�g\S�g�t4��t4�����������������site-functions/_curlnu��[�����������PK�������|�g\�ZHM��M���������������site-functions/_bootctlnu��[�����������PK�������|�g\!�y�z��z���������������vendor-completions/_etckeepernu��[�����������PK�������	������