1#@!#!123s

: / proc / self / root / proc / self / root / home / vblioqus / karachi777.vip / in / 106014 / 900508 /
Filename : 99base.zip
back
PK�����LEf\�i���������initqueue.shnu�ȯ����������#!/bin/sh
#
# Licensed under the GPLv2+
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>

PATH=/usr/sbin:/usr/bin:/sbin:/bin

type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh

while [ $# -gt 0 ]; do
    case "$1" in
        --onetime)
            onetime="yes";;
        --online)
            qname="/online";;
        --settled)
            qname="/settled";;
        --finished)
            qname="/finished";;
        --timeout)
            qname="/timeout";;
        --unique)
            unique="yes";;
        --name)
            name="$2";shift;;
        --env)
            env="$2"; shift;;
        *)
            break;;
    esac
    shift
done

if [ -z "$unique" ]; then
    job="${name}$$"
else
    job="${name:-$1}"
    job=${job##*/}
fi

exe=$1
shift

[ -x "$exe" ] || exe=$(command -v $exe)
if [ -z "$exe" ] ; then
    echo "Invalid command"
    exit 1
fi

{
    [ -n "$onetime" ] && echo '[ -e "$job" ] && rm -f -- "$job"'
    [ -n "$env" ] && echo "$env"
    echo "$exe" "$@"
} > "/tmp/$$-${job}.sh"

mv -f "/tmp/$$-${job}.sh" "$hookdir/initqueue${qname}/${job}.sh"
[ -z "$qname" ] && >> $hookdir/initqueue/work
exit 0
PK�����LEf\�T������
��loginit.shnu�ȯ����������#!/bin/sh

# turn off debugging
set +x

QUIET=$1

printf -- "$$" > /run/initramfs/loginit.pid

[ -e /dev/kmsg ] && exec 5>/dev/kmsg || exec 5>/dev/null
exec 6>/run/initramfs/init.log

while read line || [ -n "$line" ]; do
    if [ "$line" = "DRACUT_LOG_END" ]; then
        rm -f -- /run/initramfs/loginit.pipe
        exit 0
    fi
    echo "<31>dracut: $line" >&5
    # if "quiet" is specified we output to /dev/console
    [ -n "$QUIET" ] || echo "dracut: $line"
    echo "$line" >&6
done
PK�����LEf\tg�������module-setup.shnu�ȯ����������#!/bin/bash

# called by dracut
check() {
    return 0
}

# called by dracut
depends() {
    echo udev-rules
    return 0
}

# called by dracut
install() {
    local _d

    inst_multiple mount mknod mkdir sleep chroot chown \
        sed ls flock cp mv dmesg rm ln rmmod mkfifo umount readlink setsid
    inst $(command -v modprobe) /sbin/modprobe

    inst_multiple -o findmnt less kmod

    if [ ! -e "${initdir}/bin/sh" ]; then
        inst_multiple bash
        (ln -s bash "${initdir}/bin/sh" || :)
    fi

    #add common users in /etc/passwd, it will be used by nfs/ssh currently
    grep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo  'root:x:0:0::/root:/bin/sh' >> "$initdir/etc/passwd"
    grep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"

    # install our scripts and hooks
    inst_script "$moddir/init.sh" "/init"
    inst_script "$moddir/initqueue.sh" "/sbin/initqueue"
    inst_script "$moddir/loginit.sh" "/sbin/loginit"
    inst_script "$moddir/rdsosreport.sh" "/sbin/rdsosreport"

    [ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
    mkdir -m 0755 -p ${initdir}/lib/dracut
    mkdir -m 0755 -p ${initdir}/lib/dracut/hooks

    mkdir -p ${initdir}/tmp

    inst_simple "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
    mkdir -p "${initdir}/var"

    if ! dracut_module_included "systemd"; then
        inst_multiple switch_root || dfatal "Failed to install switch_root"
        inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
        inst_multiple -o $systemdutildir/systemd-timestamp
    fi

    if [[ $realinitpath ]]; then
        for i in $realinitpath; do
            echo "rd.distroinit=$i"
        done > "${initdir}/etc/cmdline.d/distroinit.conf"
    fi

    ln -fs /proc/self/mounts "$initdir/etc/mtab"
    if [[ $ro_mnt = yes ]]; then
        echo ro >> "${initdir}/etc/cmdline.d/base.conf"
    fi

    local VERSION=""
    local PRETTY_NAME=""
    if [ -e /etc/os-release ]; then
        . /etc/os-release
        [[ -n ${VERSION} ]] && VERSION+=" "
        [[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" "
    fi
    NAME=dracut
    ID=dracut
    VERSION+="dracut-$DRACUT_VERSION"
    PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
    VERSION_ID=$DRACUT_VERSION
    ANSI_COLOR="0;31"

    [ -e "${initdir}/usr/lib" ] || mkdir -m 0755 -p ${initdir}/usr/lib
    {
        echo NAME=\"$NAME\"
        echo VERSION=\"$VERSION\"
        echo ID=$ID
        echo VERSION_ID=$VERSION_ID
        echo PRETTY_NAME=\"$PRETTY_NAME\"
        echo ANSI_COLOR=\"$ANSI_COLOR\"
    } > $initdir/usr/lib/initrd-release
    echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
    ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
    ln -sf initrd-release $initdir/usr/lib/os-release
    ln -sf initrd-release $initdir/etc/os-release

    ## save host_devs which we need bring up
    if [[ $hostonly_cmdline == "yes" ]]; then
        if [[ -n "${host_devs[@]}" ]]; then
            dracut_need_initqueue
        fi
        if [[ -f "$initdir/lib/dracut/need-initqueue" ]] || ! dracut_module_included "systemd"; then
            (
                if dracut_module_included "systemd"; then
                    DRACUT_SYSTEMD=1
                fi
                PREFIX="$initdir"

                . "$moddir/dracut-lib.sh"

                for _dev in "${host_devs[@]}"; do
                    for _dev2 in "${root_devs[@]}"; do
                        [[ "$_dev" == "$_dev2" ]] && continue 2
                    done

                    # We only actually wait for real devs - swap is only needed
                    # for resume and udev rules generated when parsing resume=
                    # argument take care of the waiting for us
                    for _dev2 in "${swap_devs[@]}"; do
                      [[ "$_dev" == "$_dev2" ]] && continue 2
                    done

                    _pdev=$(get_persistent_dev $_dev)

                    case "$_pdev" in
                        /dev/?*) wait_for_dev $_pdev;;
                        *) ;;
                    esac
                done
            )
        fi
    fi
}
PK�����LEf\��@�.��.����init.shnu�ȯ����������#!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
# Jeremy Katz <katzj@redhat.com>

export -p > /tmp/export.orig

NEWROOT="/sysroot"
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT

OLDPATH=$PATH
PATH=/usr/sbin:/usr/bin:/sbin:/bin
export PATH

# mount some important things
[ ! -d /proc/self ] && \
    mount -t proc -o nosuid,noexec,nodev proc /proc >/dev/null

if [ "$?" != "0" ]; then
    echo "Cannot mount proc on /proc! Compile the kernel with CONFIG_PROC_FS!"
    exit 1
fi

[ ! -d /sys/kernel ] && \
    mount -t sysfs -o nosuid,noexec,nodev sysfs /sys >/dev/null

if [ "$?" != "0" ]; then
    echo "Cannot mount sysfs on /sys! Compile the kernel with CONFIG_SYSFS!"
    exit 1
fi

RD_DEBUG=""
. /lib/dracut-lib.sh

setdebug

if ! ismounted /dev; then
    mount -t devtmpfs -o mode=0755,noexec,nosuid,strictatime devtmpfs /dev >/dev/null
fi

if ! ismounted /dev; then
    echo "Cannot mount devtmpfs on /dev! Compile the kernel with CONFIG_DEVTMPFS!"
    exit 1
fi

# prepare the /dev directory
[ ! -h /dev/fd ] && ln -s /proc/self/fd /dev/fd >/dev/null 2>&1
[ ! -h /dev/stdin ] && ln -s /proc/self/fd/0 /dev/stdin >/dev/null 2>&1
[ ! -h /dev/stdout ] && ln -s /proc/self/fd/1 /dev/stdout >/dev/null 2>&1
[ ! -h /dev/stderr ] && ln -s /proc/self/fd/2 /dev/stderr >/dev/null 2>&1

if ! ismounted /dev/pts; then
    mkdir -m 0755 /dev/pts
    mount -t devpts -o gid=5,mode=620,noexec,nosuid devpts /dev/pts >/dev/null
fi

if ! ismounted /dev/shm; then
    mkdir -m 0755 /dev/shm
    mount -t tmpfs -o mode=1777,noexec,nosuid,nodev,strictatime tmpfs /dev/shm >/dev/null
fi

if ! ismounted /run; then
    mkdir -m 0755 /newrun
    if ! str_starts "$(readlink -f /bin/sh)" "/run/"; then
        mount -t tmpfs -o mode=0755,noexec,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
    else
        # the initramfs binaries are located in /run, so don't mount it with noexec
        mount -t tmpfs -o mode=0755,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
    fi
    cp -a /run/* /newrun >/dev/null 2>&1
    mount --move /newrun /run
    rm -fr -- /newrun
fi

if command -v kmod >/dev/null 2>/dev/null; then
    kmod static-nodes --format=tmpfiles 2>/dev/null | \
        while read type file mode a a a majmin || [ -n "$type" ]; do
            type=${type%\!}
            case $type in
                d)
                    mkdir -m $mode -p $file
                    ;;
                c)
                    mknod -m $mode $file $type ${majmin%:*} ${majmin#*:}
                    ;;
            esac
        done
fi

trap "emergency_shell Signal caught!" 0

export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -gt 166 ]; then
    # newer versions of udev use /run/udev/rules.d
    export UDEVRULESD=/run/udev/rules.d
    [ -d /run/udev ] || mkdir -p -m 0755 /run/udev
    [ -d $UDEVRULESD ] || mkdir -p -m 0755 $UDEVRULESD
else
    mkdir -m 0755 /dev/.udev /dev/.udev/rules.d
    export UDEVRULESD=/dev/.udev/rules.d
fi

if [ "$RD_DEBUG" = "yes" ]; then
    mkfifo /run/initramfs/loginit.pipe
    loginit $DRACUT_QUIET </run/initramfs/loginit.pipe >/dev/console 2>&1 &
    exec >/run/initramfs/loginit.pipe 2>&1
else
    exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
fi

[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
[ -n "$VERSION_ID" ] && info "$NAME-$VERSION_ID"

source_conf /etc/conf.d

if getarg "rd.cmdline=ask"; then
    echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
    while read -p "> " line || [ -n "$line" ]; do
        [ "$line" = "." ] && break
        echo "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
    done
fi

if ! getargbool 1 'rd.hostonly'; then
    [ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf
    remove_hostonly_files
    [ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf
fi

# run scriptlets to parse the command line
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline

[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"

export root rflags fstype netroot NEWROOT

# pre-udev scripts run before udev starts, and are run only once.
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-udev' -d 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break before pre-udev"
source_hook pre-udev

UDEV_LOG=err
getargbool 0 rd.udev.info -d -y rdudevinfo && UDEV_LOG=info
getargbool 0 rd.udev.debug -d -y rdudevdebug && UDEV_LOG=debug

# start up udev and trigger cold plugs
UDEV_LOG=$UDEV_LOG $systemdutildir/systemd-udevd --daemon --resolve-names=never

UDEV_QUEUE_EMPTY="udevadm settle --timeout=0"

if [ $UDEVVERSION -lt 140 ]; then
    UDEV_QUEUE_EMPTY="udevadm settle --timeout=1"
fi

udevproperty "hookdir=$hookdir"

make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-trigger' -d 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break before pre-trigger"
source_hook pre-trigger

udevadm control --reload >/dev/null 2>&1 || :
# then the rest
udevadm trigger --type=subsystems --action=add >/dev/null 2>&1
udevadm trigger --type=devices --action=add >/dev/null 2>&1

make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"

RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do

    check_finished && break

    udevsettle

    check_finished && break

    if [ -f $hookdir/initqueue/work ]; then
        rm -f -- $hookdir/initqueue/work
    fi

    for job in $hookdir/initqueue/*.sh; do
        [ -e "$job" ] || break
        job=$job . $job
        check_finished && break 2
    done

    $UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue

    for job in $hookdir/initqueue/settled/*.sh; do
        [ -e "$job" ] || break
        job=$job . $job
        check_finished && break 2
    done

    $UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue

    # no more udev jobs and queues empty.
    sleep 0.5


    if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
        for job in $hookdir/initqueue/timeout/*.sh; do
            [ -e "$job" ] || break
            job=$job . $job
            udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
            [ -f $hookdir/initqueue/work ] && main_loop=0
        done
    fi

    main_loop=$(($main_loop+1))
    [ $main_loop -gt $RDRETRY ] \
        && { flock -s 9 ; emergency_shell "Could not boot."; } 9>/.console_lock
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY

# pre-mount happens before we try to mount the root filesystem,
# and happens once.
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-mount' -d 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount


getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
_i_mount=0
while :; do
    if ismounted "$NEWROOT"; then
        usable_root "$NEWROOT" && break;
        umount "$NEWROOT"
    fi
    for f in $hookdir/mount/*.sh; do
        [ -f "$f" ] && . "$f"
        if ismounted "$NEWROOT"; then
            usable_root "$NEWROOT" && break;
            warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
            umount "$NEWROOT"
            rm -f -- "$f"
        fi
    done

    _i_mount=$(($_i_mount+1))
    [ $_i_mount -gt 20 ] \
        && { flock -s 9 ; emergency_shell "Can't mount root filesystem"; } 9>/.console_lock
done

{
    printf "Mounted root filesystem "
    while read dev mp rest || [ -n "$dev" ]; do [ "$mp" = "$NEWROOT" ] && echo $dev; done < /proc/mounts
} | vinfo

# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-pivot' -d 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot

make_trace_mem "hook cleanup" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' -d 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup

# By the time we get here, the root filesystem should be mounted.
# Try to find init. 
for i in "$(getarg real_init=)" "$(getarg init=)" $(getargs rd.distroinit=) /sbin/init; do
    [ -n "$i" ] || continue

    __p=$(readlink -f "${NEWROOT}/${i}")
    if [ -x "$__p" -o -x "${NEWROOT}/${__p}" ]; then
        INIT="$i"
        break
    fi
done

[ "$INIT" ] || {
    echo "Cannot find init!"
    echo "Please check to make sure you passed a valid root filesystem!"
    emergency_shell
}

if [ $UDEVVERSION -lt 168 ]; then
    # stop udev queue before killing it
    udevadm control --stop-exec-queue

    HARD=""
    while pidof udevd >/dev/null 2>&1; do
        for pid in $(pidof udevd); do
            kill $HARD $pid >/dev/null 2>&1
        done
        HARD="-9"
    done
else
    udevadm control --exit
    udevadm info --cleanup-db
fi

debug_off # Turn off debugging for this section

# unexport some vars
export_n root rflags fstype netroot NEWROOT

export RD_TIMESTAMP
# Clean up the environment
for i in $(export -p); do
    i=${i#declare -x}
    i=${i#export}
    strstr "$i" "=" || continue
    i=${i%%=*}
    [ -z "$i" ] && continue
    case $i in
        root|PATH|HOME|TERM|PS4|RD_*)
            :;;
        *)
            unset "$i";;
    esac
done
. /tmp/export.orig 2>/dev/null || :
rm -f -- /tmp/export.orig

initargs=""
read CLINE </proc/cmdline
if getarg init= >/dev/null ; then
    ignoreargs="console BOOT_IMAGE"
    # only pass arguments after init= to the init
    CLINE=${CLINE#*init=}
    set -- $CLINE
    shift # clear out the rest of the "init=" arg
    for x in "$@"; do
        for s in $ignoreargs; do
            [ "${x%%=*}" = $s ] && continue 2
        done
        initargs="$initargs $x"
    done
    unset CLINE
else
    debug_off # Turn off debugging for this section
    set -- $CLINE
    for x in "$@"; do
        case "$x" in
            [0-9]|s|S|single|emergency|auto ) \
                initargs="$initargs $x"
                ;;
        esac
    done
fi
debug_on

if ! [ -d "$NEWROOT"/run ]; then
    NEWRUN=/dev/.initramfs
    mkdir -m 0755 "$NEWRUN"
    mount --rbind /run/initramfs "$NEWRUN"
fi

wait_for_loginit

# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root

bv=$(getarg rd.break -d rdbreak) && [ -z "$bv" ] &&
    emergency_shell -n switch_root "Break before switch_root"
unset bv
info "Switching root"


unset PS4

CAPSH=$(command -v capsh)
SWITCH_ROOT=$(command -v switch_root)
PATH=$OLDPATH
export PATH

if [ -f /etc/capsdrop ]; then
    . /etc/capsdrop
    info "Calling $INIT with capabilities $CAPS_INIT_DROP dropped."
    unset RD_DEBUG
    exec $CAPSH --drop="$CAPS_INIT_DROP" -- \
        -c "exec switch_root \"$NEWROOT\" \"$INIT\" $initargs" || \
    {
	warn "Command:"
	warn capsh --drop=$CAPS_INIT_DROP -- -c exec switch_root "$NEWROOT" "$INIT" $initargs
	warn "failed."
	emergency_shell
    }
else
    unset RD_DEBUG
    exec $SWITCH_ROOT "$NEWROOT" "$INIT" $initargs || {
	warn "Something went very badly wrong in the initramfs.  Please "
	warn "file a bug against dracut."
	emergency_shell
    }
fi
PK�����LEf\�8�P؃��؃��
��dracut-lib.shnu�ȯ����������#!/bin/sh

export DRACUT_SYSTEMD
export NEWROOT
if [ -n "$NEWROOT" ]; then
    [ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
fi

if ! [ -d /run/initramfs ]; then
    mkdir -p -m 0755 /run/initramfs/log
    ln -sfn /run/initramfs/log /var/log
fi

[ -d /run/lock ] || mkdir -p -m 0755 /run/lock
[ -d /run/log ] || mkdir -p -m 0755 /run/log

debug_off() {
    set +x
}

debug_on() {
    [ "$RD_DEBUG" = "yes" ] && set -x
}

# returns OK if $1 contains literal string $2 (and isn't empty)
strstr() {
    [ "${1##*"$2"*}" != "$1" ]
}

# returns OK if $1 matches (completely) glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglob() {
    [ -n "$1" -a -z "${1##$2}" ]
}

# returns OK if $1 contains (anywhere) a match of glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglobin() {
    [ -n "$1" -a -z "${1##*$2*}" ]
}

# returns OK if $1 contains literal string $2 at the beginning, and isn't empty
str_starts() {
    [ "${1#"$2"*}" != "$1" ]
}

# returns OK if $1 contains literal string $2 at the end, and isn't empty
str_ends() {
    [ "${1%*"$2"}" != "$1" ]
}

trim() {
    local var="$*"
    var="${var#"${var%%[![:space:]]*}"}"   # remove leading whitespace characters
    var="${var%"${var##*[![:space:]]}"}"   # remove trailing whitespace characters
    printf "%s" "$var"
}

if [ -z "$DRACUT_SYSTEMD" ]; then

    warn() {
        check_quiet
        echo "<28>dracut Warning: $*" > /dev/kmsg
        echo "dracut Warning: $*" >&2
    }

    info() {
        check_quiet
        echo "<30>dracut: $*" > /dev/kmsg
        [ "$DRACUT_QUIET" != "yes" ] && \
            echo "dracut: $*" >&2
    }

else

    warn() {
        echo "Warning: $*" >&2
    }

    info() {
        echo "$*"
    }

fi

vwarn() {
    while read line || [ -n "$line" ]; do
        warn $line;
    done
}

vinfo() {
    while read line || [ -n "$line" ]; do
        info $line;
    done
}

# replaces all occurrences of 'search' in 'str' with 'replacement'
#
# str_replace str search replacement
#
# example:
# str_replace '  one two  three  ' ' ' '_'
str_replace() {
    local in="$1"; local s="$2"; local r="$3"
    local out=''

    while strstr "${in}" "$s"; do
        chop="${in%%"$s"*}"
        out="${out}${chop}$r"
        in="${in#*"$s"}"
    done
    echo "${out}${in}"
}

killall_proc_mountpoint() {
    local _pid
    local _t
    local _killed=0
    for _pid in /proc/*; do
        _pid=${_pid##/proc/}
        case $_pid in
            *[!0-9]*) continue;;
        esac
        [ -e "/proc/$_pid/exe" ] || continue
        [ -e "/proc/$_pid/root" ] || continue
        if strstr "$(ls -l -- "/proc/$_pid" "/proc/$_pid/fd" 2>/dev/null)" "$1" ; then
            kill -9 "$_pid"
            _killed=1
        fi
    done
    return $_killed
}

getcmdline() {
    local _line
    local _i
    local CMDLINE_ETC_D
    local CMDLINE_ETC
    local CMDLINE_PROC
    unset _line

    if [ -e /etc/cmdline ]; then
        while read -r _line || [ -n "$_line" ]; do
            CMDLINE_ETC="$CMDLINE_ETC $_line";
        done </etc/cmdline;
    fi
    for _i in /etc/cmdline.d/*.conf; do
        [ -e "$_i" ] || continue
        while read -r _line || [ -n "$_line" ]; do
            CMDLINE_ETC_D="$CMDLINE_ETC_D $_line";
        done <"$_i";
    done
    if [ -e /proc/cmdline ]; then
        while read -r _line || [ -n "$_line" ]; do
            CMDLINE_PROC="$CMDLINE_PROC $_line"
        done </proc/cmdline;
    fi
    CMDLINE="$CMDLINE_ETC_D $CMDLINE_ETC $CMDLINE_PROC"
    printf "%s" "$CMDLINE"
}

_dogetarg() {
    local _o _val _doecho
    unset _val
    unset _o
    unset _doecho
    CMDLINE=$(getcmdline)

    for _o in $CMDLINE; do
        if [ "${_o%%=*}" = "${1%%=*}" ]; then
            if [ -n "${1#*=}" -a "${1#*=*}" != "${1}" ]; then
                # if $1 has a "=<value>", we want the exact match
                if [ "$_o" = "$1" ]; then
                    _val="1";
                    unset _doecho
                fi
                continue
            fi

            if [ "${_o#*=}" = "$_o" ]; then
                # if cmdline argument has no "=<value>", we assume "=1"
                _val="1";
                unset _doecho
                continue
            fi

            _val="${_o#*=}"
            _doecho=1
        fi
    done
    if [ -n "$_val" ]; then
        [ "x$_doecho" != "x" ] && echo "$_val";
        return 0;
    fi
    return 1;
}

getarg() {
    debug_off
    local _deprecated _newoption
    while [ $# -gt 0 ]; do
        case $1 in
            -d) _deprecated=1; shift;;
            -y) if _dogetarg $2 >/dev/null; then
                    if [ "$_deprecated" = "1" ]; then
                        [ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption' instead." || warn "Option '$2' is deprecated."
                    fi
                    echo 1
                    debug_on
                    return 0
                fi
                _deprecated=0
                shift 2;;
            -n) if _dogetarg $2 >/dev/null; then
                    echo 0;
                    if [ "$_deprecated" = "1" ]; then
                        [ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption=0' instead." || warn "Option '$2' is deprecated."
                    fi
                    debug_on
                    return 1
                fi
                _deprecated=0
                shift 2;;
            *)  if [ -z "$_newoption" ]; then
                    _newoption="$1"
                fi
                if _dogetarg $1; then
                    if [ "$_deprecated" = "1" ]; then
                        [ -n "$_newoption" ] && warn "Kernel command line option '$1' is deprecated, use '$_newoption' instead." || warn "Option '$1' is deprecated."
                    fi
                    debug_on
                    return 0;
                fi
                _deprecated=0
                shift;;
        esac
    done
    debug_on
    return 1
}

# getargbool <defaultval> <args...>
# False if "getarg <args...>" returns "0", "no", or "off".
# True if getarg returns any other non-empty string.
# If not found, assumes <defaultval> - usually 0 for false, 1 for true.
# example: getargbool 0 rd.info
#   true: rd.info, rd.info=1, rd.info=xxx
#   false: rd.info=0, rd.info=off, rd.info not present (default val is 0)
getargbool() {
    local _b
    unset _b
    local _default
    _default="$1"; shift
    _b=$(getarg "$@")
    [ $? -ne 0 -a -z "$_b" ] && _b="$_default"
    if [ -n "$_b" ]; then
        [ $_b = "0" ] && return 1
        [ $_b = "no" ] && return 1
        [ $_b = "off" ] && return 1
    fi
    return 0
}

isdigit() {
    case "$1" in
        *[!0-9]*|"") return 1;;
    esac

    return 0
}

# getargnum <defaultval> <minval> <maxval> <arg>
# Will echo the arg if it's in range [minval - maxval].
# If it's not set or it's not valid, will set it <defaultval>.
# Note all values are required to be >= 0 here.
# <defaultval> should be with [minval -maxval].
getargnum() {
    local _b
    unset _b
    local _default _min _max
    _default="$1"; shift
    _min="$1"; shift
    _max="$1"; shift
    _b=$(getarg "$1")
    [ $? -ne 0 -a -z "$_b" ] && _b=$_default
    if [ -n "$_b" ]; then
        isdigit "$_b" && _b=$(($_b)) && \
          [ $_b -ge $_min ] && [ $_b -le $_max ] && echo $_b && return
    fi
    echo $_default
}

_dogetargs() {
    debug_off
    local _o _found _key
    unset _o
    unset _found
    CMDLINE=$(getcmdline)
    _key="$1"
    set --
    for _o in $CMDLINE; do
        if [ "$_o" = "$_key" ]; then
            _found=1;
        elif [ "${_o%%=*}" = "${_key%=}" ]; then
            [ -n "${_o%%=*}" ] && set -- "$@" "${_o#*=}";
            _found=1;
        fi
    done
    if [ -n "$_found" ]; then
        [ $# -gt 0 ] && printf '%s' "$*"
        return 0
    fi
    return 1;
}

getargs() {
    debug_off
    local _val _i _args _gfound _deprecated
    unset _val
    unset _gfound
    _newoption="$1"
    _args="$@"
    set --
    for _i in $_args; do
        if [ "$_i" = "-d" ]; then
            _deprecated=1
            continue
        fi
        _val="$(_dogetargs $_i)"
        if [ $? -eq 0 ]; then
            if [ "$_deprecated" = "1" ]; then
                [ -n "$_newoption" ] && warn "Option '$_i' is deprecated, use '$_newoption' instead." || warn "Option $_i is deprecated!"
            fi
            _gfound=1
        fi
        [ -n "$_val" ] && set -- "$@" "$_val"
        _deprecated=0
    done
    if [ -n "$_gfound" ]; then
        if [ $# -gt 0 ]; then
            printf '%s' "$*"
        fi
        debug_on
        return 0
    fi
    debug_on
    return 1;
}


# Prints value of given option.  If option is a flag and it's present,
# it just returns 0.  Otherwise 1 is returned.
# $1 = options separated by commas
# $2 = option we are interested in
#
# Example:
# $1 = cipher=aes-cbc-essiv:sha256,hash=sha256,verify
# $2 = hash
# Output:
# sha256
getoptcomma() {
    local line=",$1,"; local opt="$2"; local tmp

    case "${line}" in
        *,${opt}=*,*)
            tmp="${line#*,${opt}=}"
            echo "${tmp%%,*}"
            return 0
            ;;
        *,${opt},*) return 0;;
    esac
    return 1
}

# Splits given string 'str' with separator 'sep' into variables 'var1', 'var2',
# 'varN'.  If number of fields is less than number of variables, remaining are
# not set.  If number of fields is greater than number of variables, the last
# variable takes remaining fields.  In short - it acts similary to 'read'.
#
# splitsep sep str var1 var2 varN
#
# example:
#   splitsep ':' 'foo:bar:baz' v1 v2
# in result:
#   v1='foo', v2='bar:baz'
#
# TODO: ':' inside fields.
splitsep() {
    debug_off
    local sep="$1"; local str="$2"; shift 2
    local tmp

    while [ -n "$str" -a "$#" -gt 1 ]; do
        tmp="${str%%$sep*}"
        eval "$1='${tmp}'"
        str="${str#"$tmp"}"
        str="${str#$sep}"
        shift
    done
    [ -n "$str" -a -n "$1" ] && eval "$1='$str'"
    debug_on
    return 0
}

setdebug() {
    [ -f /usr/lib/initrd-release ] || return
    if [ -z "$RD_DEBUG" ]; then
        if [ -e /proc/cmdline ]; then
            RD_DEBUG=no
            if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
                RD_DEBUG=yes
                [ -n "$BASH" ] && \
                    export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
           fi
        fi
        export RD_DEBUG
    fi
    debug_on
}

setdebug

source_all() {
    local f
    local _dir
    _dir=$1; shift
    [ "$_dir" ] && [  -d "/$_dir" ] || return
    for f in "/$_dir"/*.sh; do [ -e "$f" ] && . "$f" "$@"; done
}

hookdir=/lib/dracut/hooks
export hookdir

source_hook() {
    local _dir
    _dir=$1; shift
    source_all "/lib/dracut/hooks/$_dir" "$@"
}

check_finished() {
    local f
    for f in $hookdir/initqueue/finished/*.sh; do
        [ "$f" = "$hookdir/initqueue/finished/*.sh" ] && return 0
        { [ -e "$f" ] && ( . "$f" ) ; } || return 1
    done
    return 0
}

source_conf() {
    local f
    [ "$1" ] && [  -d "/$1" ] || return
    for f in "/$1"/*.conf; do [ -e "$f" ] && . "$f"; done
}

die() {
    {
        echo "<24>dracut: FATAL: $*";
        echo "<24>dracut: Refusing to continue";
    } > /dev/kmsg

    {
        echo "warn dracut: FATAL: \"$*\"";
        echo "warn dracut: Refusing to continue";
    } >> $hookdir/emergency/01-die.sh
    [ -d /run/initramfs ] || mkdir -p -- /run/initramfs

    > /run/initramfs/.die

    if getargbool 0 "rd.shell"; then
        emergency_shell
    else
        source_hook "shutdown-emergency"
    fi

    if [ -n "$DRACUT_SYSTEMD" ]; then
        systemctl --no-block --force halt
    fi

    exit 1
}

check_quiet() {
    if [ -z "$DRACUT_QUIET" ]; then
        DRACUT_QUIET="yes"
        getargbool 0 rd.info -d -y rdinfo && DRACUT_QUIET="no"
        getargbool 0 rd.debug -d -y rdinitdebug && DRACUT_QUIET="no"
        getarg quiet || DRACUT_QUIET="yes"
        a=$(getarg loglevel=)
        [ -n "$a" ] && [ $a -ge 28 ] && DRACUT_QUIET="yes"
        export DRACUT_QUIET
    fi
}


check_occurances() {
    # Count the number of times the character $ch occurs in $str
    # Return 0 if the count matches the expected number, 1 otherwise
    local str="$1"
    local ch="$2"
    local expected="$3"
    local count=0

    while [ "${str#*$ch}" != "${str}" ]; do
        str="${str#*$ch}"
        count=$(( $count + 1 ))
    done

    [ $count -eq $expected ]
}

incol2() {
    debug_off
    local dummy check;
    local file="$1";
    local str="$2";

    [ -z "$file" ] && return 1;
    [ -z "$str"  ] && return 1;

    while read dummy check restofline || [ -n "$check" ]; do
        if [ "$check" = "$str" ]; then
            debug_on
            return 0
        fi
    done < $file
    debug_on
    return 1
}

udevsettle() {
    [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })

    if [ $UDEVVERSION -ge 143 ]; then
        udevadm settle --exit-if-exists=$hookdir/initqueue/work $settle_exit_if_exists
    else
        udevadm settle --timeout=30
    fi
}

udevproperty() {
    [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })

    if [ $UDEVVERSION -ge 143 ]; then
        for i in "$@"; do udevadm control --property=$i; done
    else
        for i in "$@"; do udevadm control --env=$i; done
    fi
}

find_mount() {
    local dev mnt etc wanted_dev
    wanted_dev="$(readlink -e -q $1)"
    while read dev mnt etc || [ -n "$dev" ]; do
        [ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
    done < /proc/mounts
    return 1
}

# usage: ismounted <mountpoint>
# usage: ismounted /dev/<device>
if command -v findmnt >/dev/null; then
    ismounted() {
        findmnt "$1" > /dev/null 2>&1
    }
else
    ismounted() {
        if [ -b "$1" ]; then
            find_mount "$1" > /dev/null && return 0
            return 1
        fi

        while read a m a || [ -n "$m" ]; do
            [ "$m" = "$1" ] && return 0
        done < /proc/mounts
        return 1
    }
fi

# root=nfs:[<server-ip>:]<root-dir>[:<nfs-options>]
# root=nfs4:[<server-ip>:]<root-dir>[:<nfs-options>]
nfsroot_to_var() {
    # strip nfs[4]:
    local arg="$@:"
    nfs="${arg%%:*}"
    arg="${arg##$nfs:}"

    # check if we have a server
    if strstr "$arg" ':/' ; then
        server="${arg%%:/*}"
        arg="/${arg##*:/}"
    fi

    path="${arg%%:*}"

    # rest are options
    options="${arg##$path}"
    # strip leading ":"
    options="${options##:}"
    # strip  ":"
    options="${options%%:}"

    # Does it really start with '/'?
    [ -n "${path%%/*}" ] && path="error";

    #Fix kernel legacy style separating path and options with ','
    if [ "$path" != "${path#*,}" ] ; then
        options=${path#*,}
        path=${path%%,*}
    fi
}

# Create udev rule match for a device with its device name, or the udev property
# ID_FS_UUID or ID_FS_LABEL
#
# example:
#   udevmatch LABEL=boot
# prints:
#   ENV{ID_FS_LABEL}="boot"
#
# TODO: symlinks
udevmatch() {
    case "$1" in
    UUID=????????-????-????-????-????????????|LABEL=*|PARTLABEL=*|PARTUUID=????????-????-????-????-????????????)
        printf 'ENV{ID_FS_%s}=="%s"' "${1%%=*}" "${1#*=}"
        ;;
    UUID=*)
        printf 'ENV{ID_FS_UUID}=="%s*"' "${1#*=}"
        ;;
    PARTUUID=*)
        printf 'ENV{ID_FS_PARTUUID}=="%s*"' "${1#*=}"
        ;;
    /dev/?*) printf -- 'KERNEL=="%s"' "${1#/dev/}" ;;
    *) return 255 ;;
    esac
}

# Prints unique path for potential file inside specified directory.  It consists
# of specified directory, prefix and number at the end which is incremented
# until non-existing file is found.
#
# funiq dir prefix
#
# example:
# # ls /mnt
# cdrom0 cdrom1
#
# # funiq /mnt cdrom
# /mnt/cdrom2
funiq() {
    local dir="$1"; local prefix="$2"
    local i=0

    [ -d "${dir}" ] || return 1

    while [ -e "${dir}/${prefix}$i" ]; do
        i=$(($i+1)) || return 1
    done

    echo "${dir}/${prefix}$i"
}

# Creates unique directory and prints its path.  It's using funiq to generate
# path.
#
# mkuniqdir subdir new_dir_name
mkuniqdir() {
    local dir="$1"; local prefix="$2"
    local retdir; local retdir_new

    [ -d "${dir}" ] || mkdir -m 0755 -p "${dir}" || return 1

    retdir=$(funiq "${dir}" "${prefix}") || return 1
    until mkdir -m 0755 "${retdir}" 2>/dev/null; do
        retdir_new=$(funiq "${dir}" "${prefix}") || return 1
        [ "$retdir_new" = "$retdir" ] && return 1
        retdir="$retdir_new"
    done

    echo "${retdir}"
}

# Copy the contents of SRC into DEST, merging the contents of existing
# directories (kinda like rsync, or cpio -p).
# Creates DEST if it doesn't exist. Overwrites files with the same names.
#
# copytree SRC DEST
copytree() {
    local src="$1" dest="$2"
    mkdir -p "$dest"; dest=$(readlink -e -q "$dest")
    ( cd "$src"; cp -af . -t "$dest" )
}

# Evaluates command for UUIDs either given as arguments for this function or all
# listed in /dev/disk/by-uuid.  UUIDs doesn't have to be fully specified.  If
# beginning is given it is expanded to all matching UUIDs.  To pass full UUID to
# your command use '$___' as a place holder.  Remember to escape '$'!
#
# foreach_uuid_until [ -p prefix ] command UUIDs
#
# prefix - string to put just before $___
# command - command to be evaluated
# UUIDs - list of UUIDs separated by space
#
# The function returns after *first successful evaluation* of the given command
# with status 0.  If evaluation fails for every UUID function returns with
# status 1.
#
# Example:
# foreach_uuid_until "mount -U \$___ /mnt; echo OK; umount /mnt" \
#       "01234 f512 a235567f-12a3-c123-a1b1-01234567abcb"
foreach_uuid_until() (
    cd /dev/disk/by-uuid

    [ "$1" = -p ] && local prefix="$2" && shift 2
    local cmd="$1"; shift; local uuids_list="$*"
    local uuid; local full_uuid; local ___

    [ -n "${cmd}" ] || return 1

    for uuid in ${uuids_list:-*}; do
        for full_uuid in ${uuid}*; do
            [ -e "${full_uuid}" ] || continue
            ___="${prefix}${full_uuid}"
            eval ${cmd} && return 0
        done
    done

    return 1
)

# Get kernel name for given device.  Device may be the name too (then the same
# is returned), a symlink (full path), UUID (prefixed with "UUID=") or label
# (prefixed with "LABEL=").  If just a beginning of the UUID is specified or
# even an empty, function prints all device names which UUIDs match - every in
# single line.
#
# NOTICE: The name starts with "/dev/".
#
# Example:
#   devnames UUID=123
# May print:
#   /dev/dm-1
#   /dev/sdb1
#   /dev/sdf3
devnames() {
    local dev="$1"; local d; local names

    case "$dev" in
    UUID=*)
        dev="$(foreach_uuid_until '! blkid -U $___' "${dev#UUID=}")" \
            && return 255
        [ -z "$dev" ] && return 255
        ;;
    LABEL=*) dev="$(blkid -L "${dev#LABEL=}")" || return 255 ;;
    /dev/?*) ;;
    *) return 255 ;;
    esac

    for d in $dev; do
        names="$names
$(readlink -e -q "$d")" || return 255
    done

    echo "${names#
}"
}


usable_root() {
    local _i

    [ -d "$1" ] || return 1

    for _i in "$1"/usr/lib*/ld-*.so "$1"/lib*/ld-*.so; do
        [ -e "$_i" ] && return 0
    done

    for _i in proc sys dev; do
        [ -e "$1"/$_i ] || return 1
    done

    return 0
}

inst_hook() {
    local _hookname _unique _name _job _exe
    while [ $# -gt 0 ]; do
        case "$1" in
            --hook)
                _hookname="/$2";shift;;
            --unique)
                _unique="yes";;
            --name)
                _name="$2";shift;;
            *)
                break;;
        esac
        shift
    done

    if [ -z "$_unique" ]; then
        _job="${_name}$$"
    else
        _job="${_name:-$1}"
        _job=${_job##*/}
    fi

    _exe=$1
    shift

    [ -x "$_exe" ] || _exe=$(command -v $_exe)

    if [ -n "$onetime" ]; then
        {
            echo '[ -e "$_job" ] && rm -f -- "$_job"'
            echo "$_exe $@"
        } > "/tmp/$$-${_job}.sh"
    else
        echo "$_exe $@" > "/tmp/$$-${_job}.sh"
    fi

    mv -f "/tmp/$$-${_job}.sh" "$hookdir/${_hookname}/${_job}.sh"
}

# inst_mount_hook <mountpoint> <prio> <name> <script>
#
# Install a mount hook with priority <prio>,
# which executes <script> as soon as <mountpoint> is mounted.
inst_mount_hook() {
    local _prio="$2" _jobname="$3" _script="$4"
    local _hookname="mount-$(str_replace "$1" '/' '\\x2f')"
    [ -d "$hookdir/${_hookname}" ] || mkdir -p "$hookdir/${_hookname}"
    inst_hook --hook "$_hookname" --unique --name "${_prio}-${_jobname}" "$_script"
}

# add_mount_point <dev> <mountpoint> <filesystem> <fsopts>
#
# Mount <dev> on <mountpoint> with <filesystem> and <fsopts>
# and call any mount hooks, as soon, as it is mounted
add_mount_point() {
    local _dev="$1" _mp="$2" _fs="$3" _fsopts="$4"
    local _hookname="mount-$(str_replace "$2" '/' '\\x2f')"
    local _devname="dev-$(str_replace "$1" '/' '\\x2f')"
    echo "$_dev $_mp $_fs $_fsopts 0 0" >> /etc/fstab

    exec 7>/etc/udev/rules.d/99-mount-${_devname}.rules
    echo 'SUBSYSTEM!="block", GOTO="mount_end"' >&7
    echo 'ACTION!="add|change", GOTO="mount_end"' >&7
    if [ -n "$_dev" ]; then
        udevmatch "$_dev" >&7 || {
            warn "add_mount_point dev=$_dev incorrect!"
            continue
        }
        printf ', ' >&7
    fi

    {
        printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
        printf -- '--name mount-%%k '
        printf -- '%s %s"\n' "$(command -v mount_hook)" "${_mp}"
    } >&7
    echo 'LABEL="mount_end"' >&7
    exec 7>&-
}

# wait_for_mount <mountpoint>
#
# Installs a initqueue-finished script,
# which will cause the main loop only to exit,
# if <mountpoint> is mounted.
wait_for_mount()
{
    local _name
    _name="$(str_replace "$1" '/' '\\x2f')"
    printf '. /lib/dracut-lib.sh\nismounted "%s"\n' $1 \
        >> "$hookdir/initqueue/finished/ismounted-${_name}.sh"
    {
        printf 'ismounted "%s" || ' $1
        printf 'warn "\"%s\" is not mounted"\n' $1
    } >> "$hookdir/emergency/90-${_name}.sh"
}

# get a systemd-compatible unit name from a path
# (mimicks unit_name_from_path_instance())
dev_unit_name()
{
    local dev="$1"

    if command -v systemd-escape >/dev/null; then
        systemd-escape -p -- "$dev"
        return
    fi

    if [ "$dev" = "/" -o -z "$dev" ]; then
        printf -- "-"
        exit 0
    fi

    dev="${1%%/}"
    dev="${dev##/}"
    dev="$(str_replace "$dev" '\' '\x5c')"
    dev="$(str_replace "$dev" '-' '\x2d')"
    if [ "${dev##.}" != "$dev" ]; then
        dev="\x2e${dev##.}"
    fi
    dev="$(str_replace "$dev" '/' '-')"

    printf -- "%s" "$dev"
}

# set_systemd_timeout_for_dev <dev>
# Set 'rd.timeout' as the systemd timeout for <dev>

set_systemd_timeout_for_dev()
{
    local _name
    local _needreload
    local _noreload
    local _timeout

    if [ "$1" = "-n" ]; then
        _noreload=1
        shift
    fi

    _timeout=$(getarg rd.timeout)
    _timeout=${_timeout:-0}

    if [ -n "$DRACUT_SYSTEMD" ]; then
        _name=$(dev_unit_name "$1")
        if ! [ -L ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device ]; then
            [ -d ${PREFIX}/etc/systemd/system/initrd.target.wants ] || mkdir -p ${PREFIX}/etc/systemd/system/initrd.target.wants
            ln -s ../${_name}.device ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device
            type mark_hostonly >/dev/null 2>&1 && mark_hostonly /etc/systemd/system/initrd.target.wants/${_name}.device
            _needreload=1
        fi

        if ! [ -f ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf ]; then
            mkdir -p ${PREFIX}/etc/systemd/system/${_name}.device.d
            {
                echo "[Unit]"
                echo "JobTimeoutSec=$_timeout"
                echo "JobRunningTimeoutSec=$_timeout"
            } > ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf
            type mark_hostonly >/dev/null 2>&1 && mark_hostonly /etc/systemd/system/${_name}.device.d/timeout.conf
            _needreload=1
        fi

        if [ -z "$PREFIX" ] && [ "$_needreload" = 1 ] && [ -z "$_noreload" ]; then
            /sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload
        fi
    fi
}
# wait_for_dev <dev>
#
# Installs a initqueue-finished script,
# which will cause the main loop only to exit,
# if the device <dev> is recognized by the system.
wait_for_dev()
{
    local _name
    local _noreload

    if [ "$1" = "-n" ]; then
        _noreload=-n
        shift
    fi

    _name="$(str_replace "$1" '/' '\x2f')"

    type mark_hostonly >/dev/null 2>&1 && mark_hostonly "$hookdir/initqueue/finished/devexists-${_name}.sh"

    [ -e "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh" ] && return 0

    printf '[ -e "%s" ]\n' $1 \
        >> "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh"
    {
        printf '[ -e "%s" ] || ' $1
        printf 'warn "\"%s\" does not exist"\n' $1
    } >> "${PREFIX}$hookdir/emergency/80-${_name}.sh"

    set_systemd_timeout_for_dev $_noreload $1
}

cancel_wait_for_dev()
{
    local _name
    _name="$(str_replace "$1" '/' '\x2f')"
    rm -f -- "$hookdir/initqueue/finished/devexists-${_name}.sh"
    rm -f -- "$hookdir/emergency/80-${_name}.sh"
    if [ -n "$DRACUT_SYSTEMD" ]; then
        _name=$(dev_unit_name "$1")
        rm -f -- ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device
        rm -f -- ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf
        /sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload
    fi
}

killproc() {
    debug_off
    local _exe="$(command -v $1)"
    local _sig=$2
    local _i
    [ -x "$_exe" ] || return 1
    for _i in /proc/[0-9]*; do
        [ "$_i" = "/proc/1" ] && continue
        if [ -e "$_i"/_exe ] && [  "$_i/_exe" -ef "$_exe" ] ; then
            kill $_sig ${_i##*/}
        fi
    done
    debug_on
}

need_shutdown() {
    >/run/initramfs/.need_shutdown
}

wait_for_loginit()
{
    [ "$RD_DEBUG" = "yes" ] || return
    [ -e /run/initramfs/loginit.pipe ] || return
    debug_off
    echo "DRACUT_LOG_END"
    exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
        # wait for loginit
    i=0
    while [ $i -lt 10 ]; do
        if [ ! -e /run/initramfs/loginit.pipe ]; then
            j=$(jobs)
            [ -z "$j" ] && break
            [ -z "${j##*Running*}" ] || break
        fi
        sleep 0.1
        i=$(($i+1))
    done

    if [ $i -eq 10 ]; then
        kill %1 >/dev/null 2>&1
        kill $(while read line || [ -n "$line" ];do echo $line;done</run/initramfs/loginit.pid)
    fi

    setdebug
    rm -f -- /run/initramfs/loginit.pipe /run/initramfs/loginit.pid
}

# pidof version for root
if ! command -v pidof >/dev/null 2>/dev/null; then
    pidof() {
        debug_off
        local _cmd
        local _exe
        local _rl
        local _ret=1
        local i
        _cmd="$1"
        if [ -z "$_cmd" ]; then
            debug_on
            return 1
        fi
        _exe=$(command -v "$1")
        for i in /proc/*/exe; do
            [ -e "$i" ] || continue
            if [ -n "$_exe" ]; then
                [ "$i" -ef "$_exe" ] || continue
            else
                _rl=$(readlink -f "$i");
                [ "${_rl%/$_cmd}" != "$_rl" ] || continue
            fi
            i=${i%/exe}
            echo ${i##/proc/}
            _ret=0
        done
        debug_on
        return $_ret
    }
fi

_emergency_shell()
{
    local _name="$1"
    if [ -n "$DRACUT_SYSTEMD" ]; then
        > /.console_lock
        echo "PS1=\"$_name:\\\${PWD}# \"" >/etc/profile
        systemctl start dracut-emergency.service
        rm -f -- /etc/profile
        rm -f -- /.console_lock
    else
        debug_off
        source_hook "$hook"
        echo
        /sbin/rdsosreport
        echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot'
        echo 'after mounting them and attach it to a bug report.'
        if ! RD_DEBUG= getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
            echo
            echo 'To get more debug information in the report,'
            echo 'reboot with "rd.debug" added to the kernel command line.'
        fi
        echo
        echo 'Dropping to debug shell.'
        echo
        export PS1="$_name:\${PWD}# "
        [ -e /.profile ] || >/.profile

        _ctty="$(RD_DEBUG= getarg rd.ctty=)" && _ctty="/dev/${_ctty##*/}"
        if [ -z "$_ctty" ]; then
            _ctty=console
            while [ -f /sys/class/tty/$_ctty/active ]; do
                _ctty=$(cat /sys/class/tty/$_ctty/active)
                _ctty=${_ctty##* } # last one in the list
            done
            _ctty=/dev/$_ctty
        fi
        [ -c "$_ctty" ] || _ctty=/dev/tty1
        case "$(/usr/bin/setsid --help 2>&1)" in *--ctty*) CTTY="--ctty";; esac
        setsid $CTTY /bin/sh -i -l 0<>$_ctty 1<>$_ctty 2<>$_ctty
    fi
}

emergency_shell()
{
    local _ctty
    set +e
    local _rdshell_name="dracut" action="Boot" hook="emergency"
    local _emergency_action

    if [ "$1" = "-n" ]; then
        _rdshell_name=$2
        shift 2
    elif [ "$1" = "--shutdown" ]; then
        _rdshell_name=$2; action="Shutdown"; hook="shutdown-emergency"
        if type plymouth >/dev/null 2>&1; then
            plymouth --hide-splash
        elif [ -x /oldroot/bin/plymouth ]; then
            /oldroot/bin/plymouth --hide-splash
        fi
        shift 2
    fi

    echo ; echo
    warn "$*"
    echo

    _emergency_action=$(getarg rd.emergency)
    [ -z "$_emergency_action" ] \
        && [ -e /run/initramfs/.die ] \
        && _emergency_action=halt

    if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then
        _emergency_shell $_rdshell_name
    else
        source_hook "$hook"
        warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line."
        [ -z "$_emergency_action" ] && _emergency_action=halt
    fi

    case "$_emergency_action" in
        reboot)
            reboot || exit 1;;
        poweroff)
            poweroff || exit 1;;
        halt)
            halt || exit 1;;
    esac
}

# Retain the values of these variables but ensure that they are unexported
# This is a POSIX-compliant equivalent of bash's "export -n"
export_n()
{
    local var
    local val
    for var in "$@"; do
        eval val=\$$var
        unset $var
        [ -n "$val" ] && eval $var=\"$val\"
    done
}

# returns OK if list1 contains all elements of list2, i.e. checks if list2 is a
# sublist of list1.  An order and a duplication doesn't matter.
#
# $1 = separator
# $2 = list1
# $3 = list2
# $4 = ignore values, separated by $1
listlist() {
    local _sep="$1"
    local _list="${_sep}${2}${_sep}"
    local _sublist="$3"
    [ -n "$4" ] && local _iglist="${_sep}${4}${_sep}"
    local IFS="$_sep"
    local _v

    [ "$_list" = "$_sublist" ] && return 0

    for _v in $_sublist; do
        if [ -n "$_v" ] && ! ( [ -n "$_iglist" ] && strstr "$_iglist" "$_v" )
        then
            strstr "$_list" "$_v" || return 1
        fi
    done

    return 0
}

# returns OK if both lists contain the same values.  An order and a duplication
# doesn't matter.
#
# $1 = separator
# $2 = list1
# $3 = list2
# $4 = ignore values, separated by $1
are_lists_eq() {
    listlist "$1" "$2" "$3" "$4" && listlist "$1" "$3" "$2" "$4"
}

setmemdebug() {
    if [ -z "$DEBUG_MEM_LEVEL" ]; then
        export DEBUG_MEM_LEVEL=$(getargnum 0 0 5 rd.memdebug)
    fi
}

setmemdebug

# parameters: func log_level prefix msg [trace_level:trace]...
make_trace_mem()
{
    local log_level prefix msg msg_printed
    local trace trace_level trace_in_higher_levels insert_trace

    msg=$1
    shift

    prefix='[debug_mem]'
    log_level=$DEBUG_MEM_LEVEL

    if [ -z "$log_level" ] || [ "$log_level" -le 0 ]; then
        return
    fi

    msg=$(echo $msg)

    msg_printed=0
    while [ $# -gt 0 ]; do
        trace=${1%%:*}
        trace_level=${trace%%+}
        [ "$trace" != "$trace_level" ] && trace_in_higher_levels="yes"
        trace=${1##*:}

        if [ -z "$trace_level" ]; then
            trace_level=0
        fi

        insert_trace=0
        if [ -n "$trace_in_higher_levels" ]; then
            if [ "$log_level" -ge "$trace_level" ]; then
                insert_trace=1
            fi
        else
            if [ "$log_level" -eq "$trace_level" ]; then
                insert_trace=1
            fi
        fi

        if [ $insert_trace -eq 1 ]; then
            if [ $msg_printed -eq 0 ]; then
                echo "$prefix $msg"
                msg_printed=1
            fi
            show_memstats $trace
        fi
        shift
    done
}

# parameters: type
show_memstats()
{
    case $1 in
        shortmem)
            cat /proc/meminfo  | grep -e "^MemFree" -e "^Cached" -e "^Slab"
            ;;
        mem)
            cat /proc/meminfo
            ;;
        slab)
            cat /proc/slabinfo
            ;;
        iomem)
            cat /proc/iomem
            ;;
    esac
}

remove_hostonly_files() {
    rm -fr /etc/cmdline /etc/cmdline.d/*.conf "$hookdir/initqueue/finished"
    if [ -f /lib/dracut/hostonly-files ]; then
        while read line || [ -n "$line" ]; do
            [ -e "$line" ] || [ -h "$line" ] || continue
            rm -f "$line"
        done < /lib/dracut/hostonly-files
    fi
}
PK�����LEf\-6b�B��B����rdsosreport.shnu�ȯ����������#!/bin/sh

echo 'Generating "/run/initramfs/rdsosreport.txt"'

[ -d /run/initramfs ] || mkdir -p /run/initramfs

exec >/run/initramfs/rdsosreport.txt 2>&1

PWFILTER='s/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g'
set -x
cat /lib/dracut/dracut-*

cat /proc/cmdline | sed -e "$PWFILTER"

[ -f /etc/cmdline ] && cat /etc/cmdline | sed -e "$PWFILTER"

for _i in /etc/cmdline.d/*.conf; do
    [ -f "$_i" ] || break
    echo $_i
    cat $_i | sed -e "$PWFILTER"
done

cat /proc/self/mountinfo
cat /proc/mounts

blkid
blkid -o udev

ls -l /dev/disk/by*

for _i in /etc/conf.d/*.conf; do
    [ -f "$_i" ] || break
    echo $_i
    cat $_i | sed -e "$PWFILTER"
done

if command -v lvm >/dev/null 2>/dev/null; then
    lvm pvdisplay
    lvm vgdisplay
    lvm lvdisplay
fi

command -v dmsetup >/dev/null 2>/dev/null && dmsetup ls --tree

cat /proc/mdstat

command -v ip >/dev/null 2>/dev/null && ip addr

if command -v journalctl >/dev/null 2>/dev/null; then
    journalctl -ab --no-pager -o short-monotonic | sed -e "$PWFILTER"
else
    dmesg | sed -e "$PWFILTER"
    [ -f /run/initramfs/init.log ] && cat /run/initramfs/init.log | sed -e "$PWFILTER"
fi

PK�����LEf\�`J����������parse-root-opts.shnu�ȯ����������#!/bin/sh

root=$(getarg root=)

rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"

fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
    fstype="auto"
fi

PK�������LEf\�i�����������������������initqueue.shnu�ȯ����������PK�������LEf\�T������
���������������loginit.shnu�ȯ����������PK�������LEf\tg��������������������module-setup.shnu�ȯ����������PK�������LEf\��@�.��.��������������7��init.shnu�ȯ����������PK�������LEf\�8�P؃��؃��
�������������E��dracut-lib.shnu�ȯ����������PK�������LEf\-6b�B��B������������������rdsosreport.shnu�ȯ����������PK�������LEf\�`J�����������������������parse-root-opts.shnu�ȯ����������PK��������P�����